Temperature Control Units-120℃/160℃ Alternating Temperature

Mold temperature controller is the key to optimize your injection molding and operation productivity

This temperature control unit supports applications with injection mold temperatures of 120℃ and 160℃, allowing for efficient heating adapted to various plastic properties. The heating system operates through two independent circuits by which heat transfer fluids of different temperatures pass through.

Features:
Single stage pump is adopted to save power and space
Adopting Italian brand MERI hot water pump to provide high pressure and reduce the temperature difference
Japan OMRON thermostat, equipped with touch screen PID control panel
Separate design of control box prevents the entering of water, oil and air Pipes are produced from stainless steel Fault indication function is available, no professionals required for maintenance


Specification:

Model	Unit	NTWD-120		NTWD-160
Power supply		AC3Φ380V 50HZ or other		AC3Φ380V 50HZ or other
Temperature control range	℃	Room temperature 5℃~120℃		Room temperature 20℃~160℃
Temperature control accuracy	℃	P.I.D±1℃		P.I.D±1℃
Heat transfer medium		Water		water
Cooling method		Direct cooling		Indirect cooling
Heating power	KW	6KW/9KW		6KW/9KW
Max. flow	L/MIN	50L/MIN		50L/MIN
Max. pressure	KG/CM2²	4KG/CM2		4KG/CM2
Max. power consumption	KW	13.5KW/19.5KW		13.5KW/19.5KW
Alarm function		Phase loss, phase reversal, water shortage, over-temperature, overload, overpressure		Phase loss, phase reversal, water shortage, over-temperature, overload, overpressure
Cooling water pipe	INCH	1/2"		1/2"
Circulating water pipe	INCH	3/8"×4 in 4 out*2 sets		3/8"×2 in 2 out*2 sets