High and Low Temperature and Humidity Test Chamber -70℃ ~ 180℃ /10%~98%RH/2℃/min |
Specifications & Model | YTH-2500 | YTH-500D | YTH-1000D |
Internal Volume | 250L | 500L | 1,000L |
Overall Dimensions | Internal Dimensions (W×D×H) | 550×600×750mm | 800×750×850mm | 1,000×1,000×1,000mm |
External Dimensions (W×D×H) | 800×1,500×1,650mm | 1,050×1,830×1,850mm | 1,250×2,080×2,050mm |
Performance | Temperature Range | -70℃~ 180℃ ( 210℃ can be achieved,but it is not included in indicator measurement) |
Fluctuation Range of Temperature | ≤ 0.5℃ (no-load steady state) |
Temperature Deviation | ≤ 2℃ (no-load steady state) |
Humidity Range | 10%RH~98%RH (10℃~ 95℃) |
Relative Humidity Deviation | ≤±3%RH(>75%RH,no-load steady state) ≤±5%RH(≤75%RH,no-load steady state) |
Fluctuation Range of Relative Humidity | ≤±3%RH |
Temperature and Humidity Control Mode | Hot gas bypass technology |
Temperature Change Rate | Heating rate:Not less than 2℃/min (-55 ℃~ 85℃,average value in the entire process,measured at the air outlet,no load) Cooling rate:Not less than 2℃/min ( 85℃~-55℃,average value in the entire process,measured at air outlet,no load) |
Constitution | Shell Material | Cold-rolled steel sheet with plastic powder coating |
Material of Test Area | SUS304 stainless steel with mirror finish,the gaps are fully welded by TIG (tungsten inert gas arc welding) |
Heater | Nichrome wire heater |
Cooler (Dehumidifier) | Mechanical dehumidification |
Circulating Fan | Centrifugal fan |
Air Dryer (Optional) | Decreasing dew point by adsorption freezing drying air |
Water Supply | Water Supply Mode | Automatic and manual water supply |
Water Supply Tank | 24L |
Refrigeration System | Refrigeration Mode | Two-stage cascade refrigeration |
Refrigerating Machine | Piston compressor |
Refrigerant | Environment-friendly refrigerant HFC R404a R23 |
Equipment Requirements | Ambient Conditions | 5~ 30℃/relative humidity≤85%RH |
Power Supply | 380V±38V/50Hz N G |
Total Weight of Tank | Approx. 600kg | Approx. 800kg | Approx. 1,000kg |
Applicable Standards | GB/T 2423.1-2008 Environmental Testing for Electric and Electronic Products-Part 2:Test Methods-Tests A:Cold GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products-Part 2:Test Methods-Tests B:Dry Heat GB/T 2423.3-2008 Environmental Testing for Electric and Electronic Products-Part 2:Testing Method- Test CaB:Damp Heat,Steady State GB/T 2423.4-2008 Environmental Testing for Electric and Electronic Products-Part 2:Test Method-Test Db:Damp Heat,Cyclic (12h 12h cycle) GB/T 2423.34-2008 Environmental Testing for Electric and Electronic Products-Part 2:Test Methods-Test Z/ AD:Composite Temperature/Humidity Cyclic Test GJB 150.3A-1986 Environmental Test Methods for Military Equipment High Temperature Test GJB 150.4A-1986 Environmental Test Methods for Military Equipment Low Temperature Test GIB 150.9A-1986 Environmental Test Methods for Military Equipment Damp Heat Test |
Applicable Measurement Standard | JJF 1101-2003 Calibration Specification for the Equipment of the Environmental Testing for Temperature and Humidity |