MOSFET Inverter Pilot Arc Plasma Cutter

CUT40H

Main Parameters
Cutting Thickness: 10-20mm
Applicable Power Supply: Single Phase/Three Phase
Rated Input Voltage: 110V/220V/380V
Rated Input Power: 3.6kW-8.2kW
Rated Input Current: 31A-51.4A
Open Circuit Voltage: 230V/240V/260V
Protection Class: IP23
Insulation Class: H
Cooling System: Forced air cooling

Our CUT40/60 H/NH series MOSFET inverter pilot arc plasma cutter is designed to work with a single or three phase power supply.

It is widely used for the cutting of metal plates or tubing in a variety of industries, including steel construction, manufacturing industry and automotive repair and restoration. Typical materials cut with the plasma cutter include steel, stainless steel, aluminum, lead, titanium, nickel-based composite metal, cast iron or more.

Features Our CUT40/60 H/NH series MOSFET inverter plasma cutter works with a default non-HF (high frequency) arc striking mode to ensure a stable cutting performance, continuous operation and long service life. A plasma cutter with an HF arc striking mode is also available based on customer requirements. The plasma cutter's air pressure can be adjusted as required, and will be displayed on the front panel. The MOSFET inverter works with a frequency up to 100kHz, thus ensuring the plasma arc has access to a concentrated energy. As a result, a, high cutting speed, clean and smooth cut and very little distortion are all achieved. The plasma torch's forced air cooling system ensures a high efficiency cooling, thus significantly enhancing the service life of all torch components. The plasma cutter is also designed with a pilot arc unit, which allows for a quick arc re-striking in the event of a sudden arc removal during the cutting process. By doing so, the energy consumption is significantly reduced, and the electrode is protected against a burning loss. Built-in overheat, overcurrent, overvoltage, and under voltage protection circuit ensures safe operation. Technical Parameters

Model	CUT40H-1	CUT40H-2	CUT60H2-1	CUT60H2-2	CUT60H3
Cutting Thickness	10mm	12mm	10mm	20mm	20mm
Rated Input Voltage	1P 110V	1P 220V	1P 110V	1P 220V	3P 380V
Frequency	50/60Hz	50/60Hz	50/60Hz	50/60Hz	50/60Hz
Rated Input Power	3.6KW	5.0KW	3.6KW	8.2KW	7.8KW
Rated Input Current	44.4A	31A	44.4A	51.4A	13A
Duty Cycle (40°C 10min)	60%30A, 100%25A	60%40A, 100%32A	60%30A, 100%25A	60%60A, 100%46A	60%60A, 100%46A
Open Circuit Voltage	230V	230V	240V	240V	260V
Rated Output Current Range	15-30A	15-40A	20-30A	20-60A	20-60A
Efficiency	≥80%	≥80%	≥80%	≥80%	≥85%
Power Factor	0.73	0.73	0.73	0.73	0.93
Protection Class	Ip23	Ip23	Ip23	Ip23	Ip23
Insulation Class	H	H	H	H	H
Cooling System	AF	AF	AF	AF	AF
N.W	13.0KG	13.0KG	17.5KG	17.5KG	17.5KG
G.W.	14.5KG	14.5KG	19.5KG	19.5KG	19.5KG
Packing Dimension	500×245×450mm	500×245×450mm	570×255×495mm	570×255×495mm	570×255×495mm

Customization
The appearance, cutting current, product manuals and packaging can all be customized according to customer requirements.

Accessories Plasma Torch Earth Clamp Mask Hammer Brush PU Tubing