Automatic Spacer Bending Machine

This automatic spacer bending machine is equipped with an aluminum bar cutting system, which allows for easier operator control over the aluminum frame bending. After aluminum bar bending, this equipment can also solve problems in insulated glass, such as vapor leaking from the 4 glass corners.

Parameter:
Input Voltage Total: 380V 50Hz
Total Power: 2.5KW
Air Pressure: 0.5~0.8Mpa
Max. Bending Size: 2000×2000mm
Min. Bending Size: 280×280mm
Spacer Width: 5.5~20mm
Angle Error: ≤±0.1°
Size error: ≤±0.5mm
Processing Speed: ≤30s/PCS
Total Weight: 400kg
Outside Dimension: 4000×2060×2700mm Equipment maintenance: Regularly check the active parts of the machine, then apply lubrication oil when necessary. Apply lubricating oil to the working plate to prevent rust formation when the machine is not in use. All bearings should be regularly cleaned, and lubrication oil should be added after cleaning. If the power is not connected after starting up, first check if the air switch or safety switch in the electric control cabinet are in the “on” position. If not, turn on the air switch and check to ensure the fuse wire is in good condition.