CO2 Laser Resurfacing Equipment

Description

The CO2 fractional laser system can emit a laser beam of 10.6μm in wavelength and divide it into tiny beams, forming a small image point processing area at the treatment area.

This laser can scan deep into the dermis, so the biological tissue will be thermally coagulated, vaporized and carbonized, stimulating the regeneration of a large amount of collagen. This makes the skin look healthier. Since there is no bleeding during the treatment using CO2 laser resurfacing equipment, this method is highly safe. The area of treatment will heal quickly, effectively avoiding infection. Therefore, it can be applied to any part of the body.

Scope of treatment

Cosmetic use	Wrinkles, sagging skin
	Pigmentation disorder
	Capillaries dilation (red spot)
	Sunburn(brown spot)
	Coarse pores, rough skin
	Scar (resulting from acnes, burns, scalds and operations)
Medical use	Actinic keratosis (sunburn damage, precancerous lesions)
	Seborrheic keratosis (sunburn damage, precancerous lesions)
	Sebaceous hyperplasia (yellow, lustrous projections on the face)
	Rhinophyma (nasal swelling caused by excessive tissue growth)
	Epidermal chloasma
Gynecology	Stress incontinence
	Vaginal inflammation
	Mild to moderate prolapse of uterus
	Fleshy vulva
	Vaginal relaxation

Parameters

Laser source	USA RF Laser Tube (Manufactured by Coherent America)
Working Mode	Fractional Mode Continuous Wave Mode (CW) Pulse Mode (single and repeated) Ultra Pulse Mode
Laser Wavelength	10600nm
Power of laser generator	Max 60W
Output Power	1-30W
Focus Diameter	≤0.1-1.2 mm
Treatment Depth	Max 2mm
Aiming Beam	Red Diode laser (650nm,≤5mW)
Delivery System	7-Articulated Arm
Scanning Area	Max 20×20mm
Scanning shape	Ellipse, Rectangular, Triangular, Line, Square, Hexagon
Scanning mode	Sequence Mode, Middle split Mode, Random Mode
Smoke Exhausting System	Built-in air blow
Cooling system	Air Cooling
Environmental temperature	5°C~40°C
Relative Humidity	≤80%
Power Supply	~220V±22V, 50Hz±1Hz
Dimension	450mm×550mm×1400mm
Weight	40kg

Advantages of CO2 Laser Resurfacing Equipment
Compared with traditional glass tubes, the performance of RF laser is more stable.
The maximum frequency of RF excited CO2 laser tube is 5000Hz, reaching the super-pulse mode. The complete CO2 laser resurfacing equipment can switch among continuous laser mode, pulsed laser mode, ultra-pulsed laser mode and so on, which makes it more applicable.
The high speed scanner of the RF laser tube makes the scan point thinner and less harmful to the patient.
The specially designed energy self - check and energy supply system improves its stability and efficiency.
The complete CO2 fractional laser machine adopts a low-voltage system, which makes it safe from electrical danger and electromagnetic radiation.
The device not only adopts a laser leakage preventing design, but also has multiple security protections, with the remote interlock alarming of water and electricity, so as to ensure the safety of our operators and clients.





Treatment for reference

Scanning mode	Energy of each laser shot	Interval	Treatment density	Scanning area	Repetition	Course of treatment
Wrinkle reduction	12.5-15mj	1-2ms	1.56-6.25%	Square; Straight line	Repeat 3-4 times until the skin is whitened	1-2 rounds for shallow wrinkles; 4-5 rounds for deep wrinkles.
Scar revision	7.5-15mj	1-2ms	1.56-6.25%	Circle 0.2*0.2mm, 0.5*0.5mm	Repeat 3-4 times until the skin is whitened	2-3 rounds for shallow scars; 4-5 rounds for deep wrinkles
Hemangioma removal	12.5-15mj	1-2ms	1.56-2.89%	Square	Repeat 3-4 times until the skin is whitened	2-3 rounds for small hemangiomas; 4-5 rounds for big hemangiomas
Pore tightening	7.5-15mj	1-2ms	1.56-6.25%	Circle	Repeat for 3-4 times until the skin is whitened	2-3 rounds for mild cases; 4-5 rounds for serious cases
Mole removal	＞15mj	1-2ms	25%	Circle	Repeat 3-4 times until the skin is whitened and slightly bleed	2-3 rounds for mild cases; 4-5 rounds for serious cases
Vagina contracting	30mj	1-2ms	1.56%,	Circle4*4mm	Repeat 1-2 times	2-3 rounds
Vaginal inflammation	20mj	1-2ms	2.89%,	Circle4*4mm	Repeat 2 times	2-3 rounds

Attentions:
① Energy should be reduced properly in case of mild situations, and increased in case of serious situations. The patient's tolerance should be considered at the same time.
② When used in gynecological therapy, the maximum energy should not exceed 40mj.

45° scan tip
90° scan tip

Forbidden to
People who are allergic to light;
People who have recently taken photosensitive medicines;
People who have severe external injuries;
People who have heart disease and hypertension;
People who suffer from skin peeling due to chemical products in the past 6 months.