Low Voltage Power Factor Correction Capacitor

Send Message Request a Quote

Applications
The low voltage power factor correction capacitor can be used in electrical systems to improve power factors, control the system voltage, reduce electrical loss on the wires, increase equipment output power and reduce investment costs. Our device uses self-healing metalized polypropylene film capacitors, and our miniaturization of design makes our light weight products of small size.

Specifications

Voltage range	100V-1000V 50/60Hz
Rated capacity	1-80Kvar
Environment temperature	-25℃/D-+55℃
Maximum humidity	≤95%
altitude	≤3000(above sea level)(in some case up to5000m)
Shell material	Cylindrical aluminum shell, never rust
Over voltage	1.1Un: 8hour，1.5Un: 30mintue，1.3Un: 1mintue
Over current	1.3*IN
Surge current	200 time rated current
Medium loss	≤0.25W/Kvar
Capacitance tolerance	-5%/+5%+15%Cn（nf）
Test voltage end on	2.15UN,10S
Test voltage on the shell	Up to UN≤660V: 3000VAC,10S; Over UN=660V: 6000V,10S
Cooling down method	Natural cooling
Working life	100 thousand working hours.(under normal working conditions)
Safety characteristics	Dry technology, self-healing technique, over voltage protection device, terminal on the electric shock, over current protection
Discharge resistor	The discharge module has been included in the delivery(3 minutes is approaching 50V)
IP grade	IP20，indoor assembly(Assembly with protection, IP55, direct outdoor work)
Medium material	Thickening of high quality polypropylene film
Connecting terminal	Two stage, tangible, and protection(accord with VED106100)the maximum cable cross section area is 32mm2
Standard range	IEC831-1(2),EN60831-2002,VDE0560-46,47,CE,GB/T12747-2004
Installation site	Any possible position
Installation method	With M12 bolt
Temperature protection	Temperature sensor can be built in, according to the requirements of match

Model Selection

Model MJ(Y)	Rated voltage( KV)	Rated capacity (Kvar)	Total electric capacity (uF)	Rated current (A)	Installation size D*H (mm)	Shell size D*H (mm)
0.25-5-3YN	0.25	5	254.8	6.7	M16x25	96x240
0.25-75-3YN	0.25	7.5	382.1	10	M16x25	96x240
0.25-10-3YN	0.25	10	509.5	10.7	M16x25	96x240
0.25-15-3YN	0.25	15	764.3	20	M16x25	96x240
0.25-20-3YN	0.25	20	1019	26.7	M16x25	106x240
0.25-25-3YN	0.25	25	1273.8	33.3	M16x25	106x280
0.25-30-3YN	0.25	30	1528.5	40	M16x25	106x280
0.45-10-3YN	0.45	10	157.3	12.8	M12x16	65x240
0.45-12-3YN	0.45	12	188.7	15.4	M12x16	76x240
0.45-14-3YN	0.45	14	220.2	18	M12x16	76x240
0.45-15-3YN	0.45	15	236	19.2	M12x16	76x240
0.45-16-3YN	0.45	16	251.6	20.5	M12x16	86x240
0.45-20-3YN	0.45	20	314.5	25.7	M12x16	86x240
0.45-25-3YN	0.45	25	393	32.1	M16x25	96x240
0.45-30-3YN	0.45	30	471.6	38.5	M16x25	106x240
0.45-35-3YN	0.45	35	550.2	44.9	M16x25	116x240
0.45-40-3YN	0.45	40	628.8	51.3	M16x25	106x280
0.45-45-3YN	0.45	45	707.7	57.7	M16x25	116x280

Note: Please provide your working environment and technical conditions when ordering.

Ordering reminders
1. You have to select capacitors according to the network voltage. Usually the actual network voltage will be higher than the nominal network voltage. Capacitor voltage should be at least 15V higher than the nominal network voltage. For example, 380V power system should apply capacitors of at least 400V, and 660V power grids at least capacitors of 690V.
2. The maximum working temperature of the capacitor should not exceed +50 ℃. 24 hours’ average temperature should be below 40 ℃ and 30℃ in one year.

Features
1. Our low-voltage transformer features over-voltage pull-off and current breaking electrical protection.
2. Simple installation and maintenance: There is a bolt at the bottom of the device which can save user’s installation time. With the cylindrical shell our product can be installed at any angle.
3. Long lifetime: high-quality materials and media ensures our product with 100,000 hours’ lifetime.
4. Environment friendly: We use gas perfusion instead of liquid or epoxy, so there is no risk of fire or environmental pollution due to liquid leakages. We use special gases to ensure the quality of gas perfusion, in order to meet your ecological concerns.
5. Protection against electric shocks: the terminals are all cover with special sheath and is safe to touch by hands. This gives our product not only a beautiful appearance but also protection from electric shocks.
6. Self-healing features: Capacitors are able to perform self-healing under overload.
7. Over-voltage pull-off protection: At the end of capacitor service life, or when there is overload and overheating, this protects the device from explosions.
8. Terminal design: The card-type design of terminal connection parts help prevent loosening of the screws, and ensures a reliable connection.

Low Voltage Power Factor Correction Capacitor

Scan QR to Read
Links：https://globefindpro.com/products/32430.html