Rubber Sheeting Mill

Rubber Sheet Mill, Mixing Mill, Rubber Mill, Two Roll Mixing Mill

The rubber sheeting mill is used as an auxiliary device along with internal mixers in order to make rubber sheets.

Features The rollers are made from chilled cast iron with vanadium and titanium alloys. The roller face is hard and wear resistant. The internal cavity is processed to distribute temperature in a uniform manner.

The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.

The rubber machine is also equipped with an emergency device. In case of emergency just draw the pull rod, and the machine will stop i(mm)ediately.

The transmission system adopts a hard facing gear reducer, which has a compact structure with higher transmission effciency, lower noise and longer service life.

The base frame is a complete framework, which is convenient for installation

Note: All of the rubber mill models may be equipped with either copper bushes or rolling bearings.

Technical Parameters

Model		XK-400	XK-450	XKY-550		XKY-660	XKY-710
Working diameter of rolls ((mm))		400	450	550		660	710
Working length of rolls (mm)		1000	1200	1500		2130	2200
Working linear speed of front roll (m/min)		21.9	28	31.17		22-7	30.26
Friction ratio of front and rear roll		1:1.08	1:1.08	1:1.09		1-24	1:1.51
Capacity per batch (mix-up stock) (kg)		18-35	50	540kg /h		165	190
Driven motor power (kw)		45	55	110		180	280
Overall dimensions (mm)	L	4471	5173	5870	5900	7650	9120
	W	1850	1865	2420		3460	3850
	H	1800	1800	2562	2535	2720	2930
Weight (t)		8.3	11.4	28		49	59