Heat Pipe Split Solar Water Heating System

Heat Pipe Split SolarWater Heating System
美工注意，此处放置图1

Our heatpipe split solar water heating system can be automatically controlled, thusbringing great convenience and comfort for people to use. It is designed withthe pressurized system and can be easily integrated into the building withoutany influence to the appearance of the building. Energy saving and highlyefficient, this product is also environmentally friendly and highly safe.

Technical Specifications

If not used for several days, this heat pipesplit solar water heating system will easilyget overheated. Fortunately, it can be well controlled by the PT valve in thesystem while the hot water released by the PT valve must be handled. In additionally, the antifreeze should be maintained promptly.

Application
The heat pipe split solar water heating systemis applicable in any area and for different users, especially for those whohave higher demands for the artistic building as well as the large scaledomestic hot water center system.

Working Principle   
In this product, the heat pipe and water tank are separated from each other withthe collector mounted on the roof while the water tank and other control unitsplaced indoors. Making use of the temperature difference, the controllercontrols the pump to circulate the antifreeze to bring the heat collected bythe solar collector to the coil heat exchanger of the tank to heat the water.

The heat pipe split solar water heatingsystem is a relatively complete  solar shower system which is composed of multiple solar vacuumtubes, water tank, controller as well as all kinds of valves. It comes inSDSH-200 and SDSH-300 models. Toillustrate, the SDSH-200 model adopts the heating equipment composed of 16SEIDO1 vacuum tubes. Such tubes can well absorb the solar energy andeffectively heat the water in the tank with the maximum volume reaching 200L.This model occupies 3.14m2 and can be easily integrated into the roof of the building. The tank is designed in a cylinder shapewith diameter being 520mm and height about 1530mm. Furthermore, taking up little space, this tank can alsobe placed indoors.
As compared with the SDSH-200 model, the SDSH-300 model is equipped with more vacuumtubes, so it can supply much more hot water for people to use but takes upmore space. Customers can choose appropriate products according to their specificapplication needs.