ThreeRoll Fabric CalenderingMachine
This type of three roll fabric calenderingmachine has several choices for the soft roll, including nylon roll, cottonroll, wool paper roll and rubber roll. It increases the density of the fabric,making it soft, glossy and flat after the calendering process.
Main Technical Data of the Three RollFabric Calendering Machine
1 | Type | Vertical 3-Roller 1. Top Roll –Heating roll 2. Middle Roll –Nylon roll 3. Bottom Roll –Cooling roll |
2 | Speed | 5-50 m/min |
3 | Roll Width | 1800 mm |
4 | Fabric Width | 1600 mm |
5 | Pressing Way | Hydraulic |
6 | Pressure of Hydraulic | ≤10 mpa |
7 | Max. Pressure | 60T |
8 | Bottom Roller Diameter | 360 mm |
9 | Middle Nylon Roller Diameter | 510 mm |
10 | Top Steel Roller Diameter | 360 mm |
11 | Heating Media | Electric Heating |
12 | Work Temp. | ≤100 º C |
13 | Cooling System | Wind spray cooling, bottom roller water cooling |
14 | Driving Way/Power | Through Panel Board with Temperature controller. Motor frequency-conversion adjustable |
15 | Installed Power | 56.4 kw |
| Working Power | 30 kw /h |
16 | Fabric Exit Way | Swing out with plaiter or rolling out with batching device |
17 | Total Weight | 13 Tons |
18 | Outside Measurement | Length 6000mm ×Width 4350mm×Height 3050mm |
19 | Operator Direct | Right Hand or Left Hand |
21 | Anti-static Device | 1 |
23 | Metal Detector | 1 |
24 | Spare Parts | 3 pcs of electric heating tube, 1set of oil seal, 1 set of carbon brush, 20 pcs of sealing rings, 1 set of expanding unit, hanger frame |
ThreeRoll Fabric Calendering MachineTRC-1
The upper and bottom softrolls can be nylon roll, cotton roll or wool paper roll.
Main Technical Data
SL.NO | ITEM | CONTENT |
1 | Type | Vertical 3-Roller, right hand or left hand |
2 | Speed | 5-50 m/min |
3 | Roll Width | 2000 mm |
4 | Fabric Width | 1800 mm |
5 | Pressing Way | Hydraulic |
6 | Pressure of Hydraulic | ≤10 mpa |
7 | Max. Pressure | 60MT |
8 | First Nylon Roller Diameter | 510 mm |
9 | Second Roller with Heater Diameter | 360 mm |
10 | Third Cotton Roller Diameter | 510 mm |
11 | Heating method | Oil heating with control valve and control system |
12 | Work Temperature | ≤160 ºC |
13 | Cooling Method | Compressed Air Cooling. |
14 | Driving Way/Power | Through panel board with temperature controller. Motor frequency-conversion adjustable |
15 | Installed Power | 34 KW |
16 | Fabric Exit Way | Swing out with plaiter or rolling out with batching device |
17 | Total Weight | 13 Tons |
18 | Size | 6000X4550X2800 mm |
19 | Metal Detector | 1 |
20 | End Seam Detector | 1 |
21 | Anti-Static Device | 1 |
22 | Fittings | 1 set of oil seal, 1 set of carbon brush, 30 pcs of sealing rings, hanger frame |
Three Roll Fabric Calendering Machine TRC-2
The three roll fabric calendering machine has tworolls: upper and bottom cotton rolls.
Main Technical Data
1 | Type | Vertical 3-Roller 1. Top Roll –Cotton roll 2. Middle Roll –Heating Steel Mirror Roll 3. Bottom Roll –Cotton roll |
2 | Speed | 10-100 m/min |
3 | Roll Width | 2300 mm |
4 | Fabric Width | 2200 mm |
5 | Pressuring Mode | Cylinder Jack up |
6 | Pressure of Hydraulic | ≤11 mpa |
7 | Max. Pressure between Rollers | 40T (40000kgf) |
8 | Top Cotton Roller Diameter | Φ 530 mm |
9 | Middle Heating Roller Diameter | Φ 225 mm |
10 | Bottom Cotton Roller Diameter | Φ 530 mm |
11 | Heating Media | Electric Heating |
| Heating Power of Calender Roller | 22.5 KW |
12 | Work Temp. | ≤200 ℃ |
13 | Cooling System | Wind Spray Cooling |
14 | Driving Way/Power | Through panel board with temperature controller. Motor frequency-conversion Adjustable. Driving power 15kw |
15 | Installed Power | About 44 KW |
16 | Fabric Exit Way | Rolling out with Batching Device |
17 | Total Weight (including the soft roll) | 10 Tons |
18 | Outside Measurement | Length 5140mm ×Width 4850mm×Height 2780mm |
19 | Operator Direct | Right Hand or Left Hand |
20 | Anti-static Device | 1 |
21 | Metal Detector | 1 |
22 | Spare Parts | 2 sets of oil seal, 2 sets of carbon brush, 10 pcs of sealing rings, 1 set of expanding unit, hanger frame |
We are a renowned three roll fabric calendering machine manufacturerbased in China. Our products include tworoll fabric calenderingmachine, multi-functional up and down double-sided press calendering machine, soft calendering machine and hard calendering machine among others.