LPG / LNG Rubber Hose

Send Message Request a Quote

Our LPG/ LNG rubber hoses are suitable for use with liquefied petroleum gas and liquefied natural gases.

Structure
Tube: smooth, UHMWPE and NBR material
Cover: CR, electrically conductive, abrasion resistant, oil and weather resistant, cloth impression
Reinforcement: High tensile textile cord with helix steel wire;

Lining and cover thickness
When measured by the method described in ISO 4671, the minimum thickness of the gas hose lining shall be1.6mm and that of the cover, 1.0mm.

Applicable Standards: EN 1762

Notes
1. Liquefied petroleum gases are flammable, so take all necessary precautions for safe handling.
2. Use only LPG hoses that meet or exceed Underwriter Laboratories Standards.
3. Use recommended and tested couplings designed for LPG hoses.

Use hoses for natural gas only under the following conditions:
1. Hose used to transfer liquid petroleum gas should be inspected according to the procedures below: Inspect and hydrostatic test all new LPG hose assemblies.
2. When LPG hoses are subjected to ordinary use, test every 30 days for the first six months. After initial six months, test hoses once per week.

Inside Diameter		Outside Diameter		Working Pressure		Burst Pressure		Bending Radius		Weight		Length
mm	inch	mm	inch	PSI	bar	Psi	bar	inch	mm	Lbs/ft	kg/m	ft	m
25	1	38	1.4	150	10	450	30	10	254	0.63	0.93	196	60
32	1-1/4	45	1.7	150	10	450	30	13	330	0.84	1.25	196	60
38	1-1/2	51	1.9	150	10	450	30	15	381	0.99	1.47	196	60
50	2	64	2.5	150	10	450	30	20	508	1.29	1.92	196	60
64	2-1/2	78	3.07	150	10	450	30	25	635	1.69	2.51	196	60
76	3	83	3.5	150	10	450	30	30	762	1.95	2.90	196	60
102	4	118	4.7	150	10	450	30	40	1016	2.63	3.92	196	60
125	5	145	5.7	150	10	450	30	50	1270	4.7	6.99	196	60
152	6	174	6.85	150	10	450	30	60	1524	6.02	8.99	196	60

Note: Other parameters are available upon request.

Scan QR to Read
Links：https://globefindpro.com/products/41885.html

Recommended Products