XHH-89-JC Light Gauge Steel Framing Machine

Steel Frame Roll Forming Machine

XHH-89-JC light gauge steel framing machine is used for producing cold-formedformed web joists and truss framing. This roll former is capable of producing materials with a thickness ranging from 0.6 to 1.2 mm and a coil width of 174mm. The line speed is up to 700m/h. Besides, the steel frame roll forming machine has no chamfer tool, lip cut tool and bolt hole tool.

Metal Framing Component Specifications

Model	C89-JC
Dimension	2850*820*1480mm
Main Motor Power	5.5kW
Hydraulic Motor	5.5kW
Forming Steps	8Steps
Forming Speed	2-3tons/8hours
Voltage	380V/50Hz/3Phase
Effective Width	89mm
Material Width	174mm
Flange Height	38mm
Lip	9mm
Material Thickness	0.6-1.2mm
Tolerance for cutting and punching	±0.5mm
Tolerance for forming	±0.75mm
Control System	IPC computer controlling system
Design Software	Vertex Software
Rollers	Made using SKD-11 steel with heat treatment, hard chrome plating on the surface of rollers
Material for Shaft	SKD-11
Material for Puncher	SKD-11
Material for Cutter	SKD-11

Features Post punching mould

XHH LGS Machine all with post punching and post cutting, which make more high precision performance on position & dimension

Seamless end cut connection

Seamless end-cut connection is a patent design of XHH LGS FORMER. The two ends of the vertical frame can seamlessly connect to the web of the bottom and top horizontal frames. So the weight of the house can be directly loaded and passed by the vertical frame, which makes the house safer.

Continuous web notch punching without extruding material

The strength of raw material will be greatly reduced when continuous web & lip notches are made, thus material in the pre-punching machine may be easily extruded and then cause machine jam during roll forming process. XHH LGS Machine with post punching system, which we can do more continuous web notch even in 0.55mm thin thickness without extruding material.

Lower material wasting

Short distance between punching & cutting die able to limit the start-up material waste length at 0.02m, and end material waste length within 1 meter.

Save Cost

XHH machine steel strip width is: 170-174mm width, 10mm less than the most other machines in the market. For a 200sqm house, the total frame is around 7000m, can save 439.6-659.4kg material

Material Thickness	0.8mm	1.0mm	1.2mm
Material Saved Per House	439.6kg	549.5kg	659.4kg

The length of each start-up waste of the XHH post-punching & cutting machine is about 1M; most machines on the market are pre-punching & post-cutting (other supplier), their waste material is about 8m on each start-up

Start-Up/Change Steel Coil	8.11-12.13 Kg
5 Steel Coils/Day	40.55-60.65 Kg
Material Saved/Year	12.17-18.2 T

The steel frame roll-forming equipment mainly consists of: Main forming system 1.5 Tons Manual Uncoiler Motor System IPC computer controlling system (Lenovo Laptop) Production software (1set) Design Software-Vertex, forever using license Hydraulic Automatic Punching Device (Web Notch, Swage, Service Hole, Dimple) Hydraulic post-cutting device (material: SKD-11) Automatic printing device Run out table (4m) Light Steel Construction Projects Packaging and Transportation of Steel Framing Machine Customer Show Company Exhibition Other Light Gauge Steel Framing Machines with Same Advantages