Hydraulic Tube Sealing Equipment

The hydraulic tube sealing equipment is the special rescue tool, designed to squeeze part of the metal pipeline to seal up one end of the pipeline. Then the danger caused by the leaked fluid can be receded or eliminated, which can create more favorable timing and conditions for the following rescue job. The equipment is single-action and has simple structure, which can be operated easily.

Structure of the Hydraulic Tube Sealing Equipment

1. Movable Frame
2. Stationary Knife
3. Movable Knife
4. Ledger Plate
5. Handhold
6. Hydraulic Cylinder
7. Switch Valve
8. Connector of the Hydraulic Fluid Pipeline
9. Pin Bolt

Features
1. The hydraulic tube sealing equipment complies with the standards of .
2. The hydraulic cylinder is made of the high-strength light alloy material and the knife takes usage of regrinding special tool steel.
3. With the two-way hydraulic lock and automatic reset reversing valve, the hydraulic circuit can be taken off after sealing up the pipeline to assure the safety of the operator.
4. The sealing force of the equipment is up to 170KN, which can allow the equipment sealing up the liquid and gas pipelines with diameter less than and equal to 65mm and thickness of 1 to 4.5mm to cut off the burning materials.

Operation Principle
The hydraulic tube sealing equipment is power supplied by connecting the manual hydraulic pump through the connector of the hydraulic fluid pipeline. The hydraulic pressure acting on the piston is passed to the movable knife through the connecting rod. Then the metal pipeline can be squeezed at the needed position to carry out the sealing job. When the equipment is connecting with the manual hydraulic pump with the switch valve of the pump closed, the hydraulic fluid pressure in the hydraulic cylinder is kept and the equipment is at the state of working. If you need to move away the pump, you should turn off the switch valve of the pump. Then the hydraulic fluid pipeline connector can be unscrewed and the pump can be moved away to the other rescue places. At this time, the pressure in the hydraulic cylinder is still kept and the equipment is still at the working state.

Main Technical Parameters of the Hydraulic Tube Sealing Equipment