RSPS Solenoid Valve
Features
1. The RSPS solenoid valve is a valve for use with steam, liquid, gas, and oil.
2. The temperature of the medium is between -5 and 180℃.
3. The acting pattern: direct step by step.
4. Working pressure: normallyclosed: 0-10bar.
5. The RSPS solenoid valve is made with forgedbrass, precision casting stainlesssteel or cast brass.
6. It issealed by the PTFE membrane.
7.Protection degree of the coils: encapsulate coil: IP65.
Special Orders
We also offer the solenoid valve with special specifications.
1. For use with hot water or constanttemperature medium, the solenoid valve can use the VITON seal. You should mark a V on the order. The temperature of the medium can reach 150℃.
2. Heavy caliber: ф40~ф65. We offer the cast iron couplingflange to joint the solenoid valve, stainless steelvalve deck and internals.
3. If youneed a solenoid valve with 16kgf/cm2 working pressure, mention it on the order.
Technical Parameters of the RSPS Solenoid Valve
Model | RSPS-15 | RSPS-20 | RSPS-25 | RSPS-32 | RSPS-40 | RSPS-50 | RSPS-20F | RSPS-25F | RSPS-32F | RSPS-40F | RSPS-50F | RSPS-40F | RSPS-50F | RSPS-15JF | RSPS-20JF | RSPS-25JF | RSPS-32JF | RSPS-40JF | RSPS-50JF |
Joint | G1/2 | G3/4 | G1 | G11/4 | G11/2 | G2 | Copper flanged joint | Cast iron flanged joint | Stainless steel flanged joint | ||||||||||
Diameter | 15 | 20 | 25 | 32 | 40 | 50 | 20 | 25 | 32 | 40 | 50 | 40 | 50 | 15 | 20 | 25 | 32 | 40 | 50 |
CV factor | 4.5 | 7.6 | 12 | 22 | 30 | 48 | 7.6 | 12 | 22 | 30 | 48 | 30 | 48 | 4.5 | 7.6 | 12 | 22 | 30 | 48 |
L mm | 67 | 80 | 92 | 96 | 118 | 150 | 107 | 123 | 135 | 154 | 190 | 150 | 185 | 106 | 106 | 135 | 140 | 145 | 182 |
H mm | 132 | 148 | 160 | 183 | 191 | 210 | 165 | 195 | 222 | 235 | 250 | 230 | 250 | 164 | 166 | 185 | 220 | 230 | 250 |
Temperature of medium ℃ | -5 ~180℃ | ||||||||||||||||||
Operating pressure (bar) | Normally closed: 0~10; | ||||||||||||||||||
Max compression resistance bar | 20 | ||||||||||||||||||
Voltage | 220VAC/50HZ 20VA; DC24V 26W; voltage range: ±10%; The solenoid valve in other voltage range can be made to order. |
YUYAO NO.4 INSTRUMENT FACTORY is a major manufacturer ofsteam solenoid valve, based in China. We offer various types of products such assteam solenoid valve, pilot solenoid valve, liquid plastic solenoid valve andso on. Our products are high quality andcompetitively priced. We can complete thefull chain of manufacturing high pressure solenoid valve, irons solenoid valve,etc. right here in China. Our lower manufacturing cost can save yourpurchasing cost. A more detaileddescription of our product is shown on the page.