Industrial Cable Manufacturer

Structure Reinformanced member Strength member Fiber Sheath Description of GJYX(F)CH fiber, self-supporting drop cable for network access

In GJYX(F)CH fiber, self-supporting drop cable for network access, the optical unit is located at the center, placed around two parallel nonmetal strength members (FRP or KFRP) or metal strength members. Finally, extrude black or chromatic polyvinyl chloride(PVC) or low-smoke halogen-free material (low-smoke, halogen-free, flame retardant) as its sheath.

Parameter Technical parameter

Item	Content	Value
	Number of cores	1	2	4
Strength member	Material	KFRP/ steel wire
Strength member	Material	Steel wire
Outer sheath	Thickness /mm	≥0.3
Reference outer diameter	mm	(2.0*5.0)±0.1	(2.0*5.0)±0.1	(2.0*6.0)±0.1
Operating temperature	℃	-40~+60
Tensile force	Short term/long term N	600/300
Flatten	Short term/long term N	2200/1000
*We can design the product according to client requirements.

Characteristic of optical fiber

		G.652.D	G.657A2	50/125μm	62.5/125μm
Attenuation	@850nm	-	-	≤3.0dB/km	≤3.0dB/km
	@1300nm	-	-	≤1.0dB/km	≤1.0dB/km
	@1310nm	≤0.36dB/km	≤0.36dB/km	-	-
	@1550nm	≤0.22dB/km	≤0.23dB/km	-	-
Bandwidth	@850nm	-	-	≥500MHz·km	≥200MHz·km
	@1300nm	-	-	≥1000MHz·km	≥600MHz·km
Fiber cutoff wavelength		≤1260nm	≤1260nm	-	-
Polarization mode dispersion	Single optical fiber	≤0.20ps/√km	≤0.20ps/√km	-	-
Link value (M=20, Q=0.01%)			≤0.10ps/√km	-	-

Main machinery and environment performance

Item	Inspection standard	Procedure of inspection	Requirements
Pull	IEC 60794-1-2-E1	According to technical parameter	Residual additional attenuation≤0.03dB
Flatten	IEC 60794-1-2-E3	According to technical parameter	Additional attenuation under flattening force for short term≤0.4dB
Impact	IEC 60794-1-2-E4	Impact: 1N, height: 1m, 3 points at least	Residual additional attenuation≤0.4dB
Backward and forward bending	IEC 60794-1-2-E6	Load: 20N 300times	Residual additional attenuation≤0.4dB
Temperature recycle test	IEC 60794-1-2-F1	-40℃ ~+60℃	Additional attenuation≤0.02dB
Combustion performance	IEC 60332-1-2	Fire resistance	Every single wire can be burnt vertically.
		Density of the smoke	Light transmittance ≥50%
		Corrosiveness	PH of the gas when burning≤4.3, electric conductivity≤10μs/mm
* The monitoring of all optical fiber attenuation changes is operated in wavelength of 1550nm.

Features
This product is a special, low bend sensitivity fiber, and will offer a larger bandwidth in order to reinforce the network transmission performance. The two parallel FRP or metal strength members offer an excellent compression resistance to the optical cable and thus, significantly increase the fiber's protection. A single steel wire is used in the optical cable as an additional strength member to guarantee the excellent compression resistance. This optical fiber is designed with a unique groove to make it easy and convenient to strip or connect. This design simplifies installation and maintenance of the optical fiber. We use an environmentally friendly, low-smoke halogen-free flame-retardant polyethylene or flame retardant polyvinyl chloride as the optical fiber sheath. This optical fiber is suitable for various connectors and can be used to connect the end of the optical fiber to connectors. Installation

Outdoors aerial accessing

Standards

YD/T1997.1-2014 bow-type drop cable for network access
IEC 60794-3-2014 optical cable section 3
IEC 60332-1-2-2004 power cable and optical cable combustion test under flame condition