Home CHUY800 Dynamic Compaction Equipment

CHUY800 Dynamic Compaction Equipment

CHUY800 dynamic compaction equipment is a product developed by CSR Beijing Time with rated tamping capacity of 7000kN.m when the machine is used under gantry. As a key component of dynamic compaction tamper, the elevator adopts mechanical open gear transmission to make the dynamic compactor more applicable to construction requirements. Compared with traditional mechanical hydraulic integrated products, its reduction gearbox adopts forward gear and reverse gear combined with dynamic lowering function to realize small tonnage lifting. Thus, the dynamic compaction machine provides wide applications and strong adaptability. The whole equipment and dynamic lowering function are patented.

CHUY800 Dynamic Compaction Equipment

Main Features
1. Strong tamping capacity

Without gantry, the tamping capacity of the dynamic compaction equipment can reach 7000kN.M and the permitted hammer weight is 35t. With gantry, the tamping capacity can reach 15000kN.m and the permitted hammer weight is 62.5t.

2. Safe and reliable
Safety margin of structure and part design is sufficient. Hydraulic parts of well-known brand greatly increase the number of operation cycles. Large chassis design effectively increases stability of tamping operation. Both working and installation modes are convenient and reliable.

3. Excellent operation performance
According to the requirement of dynamic compaction equipment use, operation control and electro-hydraulic speed control make the operation smoother.

4. Easy maintenance
Access time to positions for adjustment is no more than 10min per person. Access time to positions for maintenance is at most 30 min per person. The longest access time to repair parts is no more than 2h per person. GPS remote monitoring system is convenient for users to carry out maintenance and repair.

5. Perfect transportation
With the function of track detachable, the maximum transport width is 3.44m and the maximum unit weight is 35T, so the construction equipment is very convenient to transport.

6. Low fuel consumption
Compared with the same tonnage products from other manufactures, the mechanical hydraulic integrated dynamic compactor machine is more affordable and fuel efficient. Additionally, it has highly efficient transmission system with low failure rate.

Technical Parameters of Dynamic Compaction Equipment
Tamping Capacity 700(15000) kN.m with gantry
Hammer Weight 35(62.5)t with gantry
Boom Length 25-30m
Boom Working Angle 60-78º
Lifting Speed 92m /min (The first layer)
Max. Pulling Capacity of Single Rope 14.0t (the first layer)
Lifting Speed of Boom 50m /min
Rotation Speed 0-2.4rpm
Traveling Speed 0-1.0km/h
Lifting Rate 4(7) (with gantry)
Gradeability 30%
Engine Output 247kw/1900rpm (national Ⅲ )
Chassis Wheel-Base 6670mm
Chassis Wheel-Base 6200mm (transport width)
Track Shoe Width 860mm
Total Weight 94t
Ground Pressure about 0.09Mpa
Counter-Weight Mass 23.5t
Dimension 8290*6200*3440

Recommended Products
Hot Products