Vehicle Maintenance Lifting Platform

Vehicle Maintenance LiftingPlatform

Vehicle maintenancelifting platform is mainly used for disassembling the main transformer, relay,etc. As electric self walking lifting platform, our product is equipped withintelligent quick charger, which can provide the functions of up and down, leftand right movement, moving back and forth, table rotation, forward andbackward, turning left or right, etc.

Our vehicle maintenance lifting platform is characterized by small volume, lowheight, large carrying capacity, easy to hold up the relay of 5 tons, simple toinstall, disassemble, transport and remove and so on. It improves the initialdisadvantage of artificial moving and no lifting space, which not onlyliberates the labor force but also significantly raises the work efficiency.Thus, our product is an ideal product for vehicle installation and maintenance.

Main Technical Parameter

Direction for Use
Before the first use, the operator should learn more about the compositionand components of our equipment. After understanding the use method of fullyautomatic hydraulic lifting work platform, you can operate it in prevention ofunnecessary damage.

1. Firstly, you should open the power switch. When the battery power display isbelow the red danger logo, or less than 40 percent, the battery charging shouldbe done in time. There is no need to change stalls on charge process. Thecharger is equipped with the function of automatic power off protection inprevention of excessive charging. After the charging is finished, you shouldturn power off and unplug the charger plug.

2. Next, you can operate such functions as walking, lifting and so on. Ourequipment comes with advanced imported remoter. Other functions includeforward, backward, turning left or right, up and down, moving back and forth,moving left or right, table rotation and so on.

3. The third step is to install our equipment. The equipment should be placedto the central position of platform surface. By pressing the button forwalking, you can make the lifting platform walk. Also, you can press both thewalking button and turning button at the same time to turn the direction.Equipped with rectangular wood, our product can avoid getting stuck by placingthis wood into the tank. During each stop, our product can provide brakes andautomatic locking function, which increases its stability and accuracy. Inorder to more accurately align more screw rods, we add the rotary mechanism onthe top layer which features large carrying capacity and flexible rotation.

4. Specialists must be sent to operate, repair and maintain our liftingplatform.

Notesof Platform Maintenance
1. After each operation, battery chargingis a must.

2. If the platform has not been used for a long time, the battery should becharged once a month.

3. The charging environment must keep dry and well ventilated. Besides, firesource, sparks and strong heat radiation source around are not allowed.

4. It is necessary to monthly check the electrolyte and distilled water instorage battery. If the battery part is not covered by the electrolyte, or theelectrolyte is below the electrolyte level line of storage battery, you shouldadd electrolyte and adequate distilled water.

5. During charge process, adding water is prohibited to prevent the electrolytefrom spraying on or hurting someone.

6. Storage battery surface should remain clean and dry, because dirty oroverflowing electrolyte may absorb water from air to make storage batterygradually increase leakage loss and reduce the capacity and lifespan of storagebattery. The exceeded electrolyte on battery surface can be neutralized by weakalkaline solution and then be washed by water. After that, it should be wipedby clean cotton cloth.

7. The hydraulic oil in fuel tank must be checked quarterly. It is necessary toin time deal with the circumstances of oil shortage, dirty oil and so on. Inaddition, you should use No.32 hydraulic oil in summer and No.46 wear resistanthydraulic oil in winter.

8. After a period of time, if the battery charge quantity is insufficient,excluding other factors like electrolyte and good line, you should consider toreplace the storage battery. The storage battery type should accord with theelectricity parameter.

9. The driving motor is maintenance free motor, but preservation is stillnecessary after a period of time so as to keep good lubrication.

10. You should check the connector lugs, binding posts and wire cables onceevery six months, and timely handle such situations as rust and poor contact,etc. Moreover, the technical requirement for changing wire cable and otherelectrical appliances is not supposed to be below the technical demand forinitial wire cable.