36V 175W/180W/185W Black Mono Solar Panel
Benefits
I-V Curves
Engineering Drawings
SL175-185TU-36MBK
Electrical Data
Maximum Power (W) | 175 | 180 | 185 |
Optimum Power Voltage (Vmp) (V) | 38.04 | 38.47 | 38.78 |
Optimum Operating Current (Imp) (A) | 4.60 | 4.68 | 4.77 |
Open Circuit Voltage (Voc) (V) | 45.17 | 45.60 | 45.90 |
Short-circuit Current (Isc) (A) | 4.92 | 5.01 | 5.10 |
Photoelectric Conversion Efficiency of Solar Cell (%) | 16.48 | 16.95 | 17.42 |
Photoelectric Conversion Efficiency of Whole Module (%) | 13.71 | 14.10 | 14.49 |
Wattage Tolerance | 0% to 3% | ||
Nominal Operating Cell Temperature (°C) | 47±2 |
Temperature Coefficient of Isc (%) | 0.04 |
Temperature Coefficient of Voc (%) | -0.35 |
Temperature Coefficient of Pm (%) | -0.45 |
Temperature Coefficient of Im (%) | 0.04 |
Temperature Coefficient of Vm (%) | -0.35 |
Temperature Characteristics
Components and Technical Parameters
Solar Cell (mm) | Mono Type 125×125 |
Number of Cell (pcs) | 6×12 |
Size of Module (mm) | 1580×808×40 |
Front Glass Thickness (mm) | 3.2 |
Maximum Load Capacity of Surface (Pa) | 2400-5400 |
Allowable Hail Load | 23m/s, 7.53g |
Weight for Per Piece (kg) | 15 |
Junction Box Type | TUV Certification |
Bypass Diode Rating (A) | 12 |
Cable and Connector Type | TUV Certification |
Frame | 40mm Aluminum Alloy |
Back Sheet | TPT |
Temperature Range (°C) | -40 to 85 |
Fill Factor (%) | 70-76 |
Standard Test Conditions | AM1.5, 1000W, 25±2°C |
Packing
Packing | Wooden Box |
1×20 inches Container | 14Pallets/426pcs |
1×40 inches HQ | 28Pallets/924pcs |
The black mono solar panel has three kinds with the maximum power of 175W, 180W and 185W respectively. The tolerance for the output power ranges from 0% to 3%. Designed with the dimension of 1580×808×40mm, the product has small volume. It only occupies small space and can be installed conveniently. Consisting of 72 solar cells, it has high energy efficiency. The product can be widely used for residential roofing system.
When installing the black mono solar panel, the factors such as the model, solar capacity, installation site and array arrangement of the product should be fully considered. Meanwhile, the strength protection measures for wind resistance, weight support and other aspects should be taken. The solar cell array and the system should be grounded to achieve lightening protection.