Home Venturi Fertilization Device

Venturi Fertilization Device

Venturi Fertilization Device

The venturi fertilization device is connected to the water supply pipe valve in parallel in the micro irrigation system or at the entrance of the irrigation area. While using, the valve is turned down to generate certain differential pressure at the front and rear of the valve. When the water passes the branch pipe installed with our product, it will generate the vacuum suction force to inhale the fertilizer liquid uniformly from the open fertilizer bucket for fertilization.

Apart from low cost, this venturi fertilization device performs with stable fertilization concentration without any external motion and it is convenient for use. Moreover, it is suitable for not large area irrigation and in the micro irrigation system of perforated pipes with thin wall under low pressure. Classified into adjustable type and common type, this product can be supplied in size of 1 inch, 1.5 inches and 2 inches. As its maximum inhalation volume of fertilizer is 170L per hour, our product is adequate to fulfill different using demands.

Technical Specifications

Venturi Fertilization Device


Item

Parameters

Introduction

Working Pressure (m)

4~40

The pressure of the water inlet on the product

Flow Rate (m³/h)

0.7~7.0

The total flow rate of the product with parallel connected tubes

Liquid(L/h)

0~170

Relate to the of front and rear part of the product

Flow Rate of Venturi Tube (m³/h)

0.7~1.5

The flow rate of the product in series connection pipeline


 


Recommended Products
Hot Products