Dimmable Color Temperature LED Panel Light

Dimmable Color Temperature LED Panel Light

Dimmable color temperature LED panel light can be used in restaurant, office, hotel, shopping mall, subway, hall, school, hospital, hallway, lounge and conference room.

Detailed Specifications 

Package
Three layer package
Inner EPE holder
1pc into inner box, 4pcs into outer carton
Innner box dimension: L680 X W690 X H55mm
Outer carton dimension (Lx W x H): 700 x 710 x 240mm
N.W: 19.2 kg/carton
G.W: 21.2 kg/carton


<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

 
Dimmable color temperature LED panel light has many standout characteristics and features.
1. This product is energy-efficient and it can save 60%-80% energy in comparison with traditional products.
2. Imported chips are used to ensure excellent light efficiency performance.
3. Rigorously tested self-developed LED driver is used to guarantee stability, durability and easy after-sales maintenance.
4. To ensure long service life of LED, high quality aluminum shell structure which is in line with cooling requirements is adopted.
5. Light guiding panel has excellent performance so light is more uniform and light utilization is improved as well.
6. As environmentally-friendly product, this product doesn’t contain mercury, UV radiation in comparison with traditional products. In addition, without flicker, this product can protect eyesight so it is pretty suitable for long time learning and working.
7. There are rich options for colors. Apart from white and warm white, RGB can be customized as well.
8. With high color rendering index, true color of objects and environment can be better displayed.
9. It has easy and flexible installation and two ways of installation are available, including suspended and recessed.
10. Color temperature can be adjusted by remote control and various colors can be selected.

配光曲线图 Photometric Data

光强单位 Luminous intensity unit

面板灯照度分布图(白光) Illumination Distribution Diagram of LED Panel Light (white light)


1.白光 White light
2.LED面板灯 LED panel light
3.照射范围 Range of irradiation
4.中心 Center
5.光束角 Beam angle

面板灯照度分布图(暖白)Illumination Distribution Diagram of LED Panel Light (warm white)


1.暖白 Warm white
2.LED面板灯 LED panel light
3.照射范围 Range of irradiation
4.中心 Center
5.光束角 Beam angle

面板灯接线示意图: Wiring Diagram of LED Panel Light

输入DC24V Input power supply

面板灯联机示意图: Online Schematic Diagram of LED Panel Light

Power Supply DC24V


控制器和遥控器示意图：Schematic Diagram of Controller and Remote Control


1. 遥控器示意图 Schematic diagram of remote control
2. 信号输入（连接上一个控制器输出）Signal input( connected with the previous output of controller)
3. 信号输出（连接下一个控制器输入）Signal output( connected with the next input of controller)
4. DC24V输入接口 Input interface
5. In
6. Signal
7. Out
8. LED Panel Controller
9. LE-PCON-BC
10. Output
11. Power In
12. DC 24V
13. 连接LED面板灯 Connected with LED panel light

遥控器示意图  Schematic diagram of remote control

2. 暖白 Warm white
3. 冷白 Cold white
4. 亮度 Brightness
5. 开关机 On and off
6. 安装说明：Installation instructions

A. 嵌入式 Recessed

1. 用手把弹簧拌起 Lift the spring with hand
2. 天花板 Ceiling
3. LED面板灯 LED panel light
4. 弹簧 Spring

Steps

a. Lift the spring with hand and form a right angle with LED panel light
b. Put LED panel light into the opening of ceiling
c. Loose the spring after it is fixed

 
B. 吊装式 Suspended

1. 天花顶板  Ceiling
2. 塑胶固定瞄 Plastic anchor
3. LED面板灯 LED panel light
4. 开孔4*5MM Hole opening 4*5MM
5. 吊绳 Lifting rope
6. 吊绳固定头 Fixed head of lifting rope
7. 锁卡 Snap ring

Steps
a. First, dig four holes on the ceiling and fix plastic anchor
b. Fix the lifting rope head on the plastic anchor
c. Lock the lifting rope on the LED panel using snap ring 
d. Fix the lifting rope locked LED panel light on the fixed head of lifting rope and make sure LED panel light is parallel with the ceiling.

C.吸顶式 Ceiling surface mounted

吸顶架  Roof rack
1. 先把吸顶架固定好 Fix the roof rack
天花板 Ceiling
2. 再把吸顶架固定在天花板上 Mount the roof rack on the ceiling
3. 然后把安装好的吸顶架取掉一侧 Remove one side of mounted roof rack
LED面板灯 LED panel
4. 再将LED面板灯在槽口插入进去 Insert LED panel light into the slot
5. 最后把取掉的一侧固定好 Fix the removed side