25CC Brush Cutter

25CC Brush Cutter

Technical Parameters

25CC brush cutter contains five models including CG250, CG260D, CG260, CG260B, and CG260T. These products have similar discharge capacity, and the value is around 25cc. Meanwhile, this equipment has a relatively longer working beam comparing with other series, and the specific number is 1492mm. In addition, its weight is only 7.0kg.

CG250 brush cutter set the cutting blade and small gasoline engine at two ends of the working beam, and a transmission shaft is used to drive the blade for cutting process. Meanwhile, a cleaning device is fixed at the back of blade, and the cut weeds are gathered in this device. As a result, the user doesn’t need to clean the working area which eases your work.

CG260D is equipped with 1E34F gasoline engine, and the mixed fuel ratio is 25:1. Meanwhile, the discharge capacity is only 25.4cc, but its power is 0.7kW, and the rotation speed is 7500r/min which allows a pretty fast cutting speed. This brush cutter has a movable bike style handle on the working beam, and the control buttons are set on the handle, thus your operation is very convenient.

CG260 is a light machine, and its rated power is 0.65kW with rotation speed of 6500r/min which guarantees the good cutting performance. In addition, you should do the maintenance work carefully. The blade rotates 6500 times per minute, and usually the machine needs to work for about 2 hours every time, so you’d better add a little engine oil to lubricate the components at times, and put the machine at dry place for storage. These details will extend the service life of our product.

CG260B adopts 1E34F engine, and the discharge capacity is 25.4cc which means that the product can save a lot of oil, and that is very important nowadays. The rated power is 0.7kW and the high rotation speed of the blade (7500r/min) guarantees the excellent cutting performance. Meanwhile, the light weight of this brush cutter makes it easy to carry, and this product is your ideal choice.

CG260T consists of gasoline engine, working beam (movable bike style handle) and cutting device, and it has three colors (black, white and green) in one machine which makes it very pretty. This machine has a small blade, and the blade is protected by a round suction tank. When the machine is working, this small suction tank will hold the weeds, and then the blade rotates to cut the weeds. As a result, this device prevents the blade from touching the ground, and further damage is avoided.