EMA09 4 Flute Corner Radius End Mill, Regular Length

Special 4~6 flutes design provides small chip loads, higher metal removal rates and better surface finish on the workpieces Results in excellent performance when cutting prehardened steels up to HRc56 Used for machining molds & dies Fit for milling from roughing to finishing at one time, with reduced tool changing times Oerlikon Balzers coating and tool geometry provide outstanding cutting ability and wear resistance Application
Product Specifications

Coating	AITiN /TiALN /TiAISiNAITiSiN	HRC	HRC46/56
Helix Angle	35°/36°/37°	Shank	Cylindrical H6
Material	IMC™ UMG Carbide Rod	Tolerance on Cutting Diameter	0-0.030

Carbide End Mill, 4 Flutes, Corner Radius - for Side Cutting（UNT-EMA09）

UNT EDP # Click to Order	Corner RadiusR	Mill Dia.D1	Shank Dia.D2	Flute LengthL1	O.A.L.L2	Flutes
EMA090101	R0.1	1.0	4	3	50	4
EMA090102	R0.2	1.0	4	3	50	4
EMA090201	R0.1	2.0	4	6	50	4
EMA090202	R0.2	2.0	4	6	50	4
EMA090203	R0.3	2.0	4	6	50	4
EMA090302	R0.2	3.0	4	8	50	4
EMA090303	R0.3	3.0	4	8	50	4
EMA090305	R0.5	3.0	4	8	50	4
EMA090310	R1.0	3.0	4	8	50	4
EMA090402	R0.2	4.0	4	11	50	4
EMA090403	R0.3	4.0	4	11	50	4
EMA090405	R0.5	4.0	4	11	50	4
EMA090410	R1.0	4.0	4	11	50	4
EMA090505	R0.5	5.0	6	13	50	4
EMA090510	R1.0	5.0	6	13	50	4
EMA090602	R0.2	6.0	6	16	50	4
EMA090603	R0.3	6.0	6	16	50	4
EMA090605	R0.5	6.0	6	16	50	4
EMA090610	R1.0	6.0	6	16	50	4
EMA090615	R1.5	6.0	6	16	50	4
EMA090620	R2.0	6.0	6	16	50	4
EMA090802	R0.2	8.0	8	20	60	4
EMA090803	R0.3	8.0	8	20	60	4
EMA090805	R0.5	8.0	8	20	60	4
EMA090810	R1.0	8.0	8	20	60	4
EMA090815	R1.5	8.0	8	20	60	4
EMA090820	R2.0	8.0	8	20	60	4
EMA091005	R0.5	10.0	10	25	75	4
EMA091010	R1.0	10.0	10	25	75	4
EMA091015	R1.5	10.0	10	25	75	4
EMA091020	R2.0	10.0	10	25	75	4
EMA091030	R3.0	10.0	10	30	75	4
EMA091205	R0.5	12.0	12	30	75	4
EMA091210	R1.0	12.0	12	30	75	4
EMA091215	R1.5	12.0	12	30	75	4
EMA091220	R2.0	12.0	12	30	75	4
EMA091230	R3.0	12.0	12	30	75	4

• End mills with non-standard sizes or specifications not listed above can be customized according to customer needs.