Waveguide Dehydrator (Dehydrator for Satellite Communication System)

Send Message Request a Quote

The waveguide dehydrator is an important piece of support equipment for satellite communication systems engineering. Dehydrators are mainly used for microwave stations, radar stations, satellite ground stations, radio and TV transmitting stations. This waveguide pressurization system can maintain dry air pressure in the communication feed line or cable automatically in order to keep out air moisture and water in order to ensure the quality of the transmission signal.

Waveguide Dehydrator (Dehydrator for Satellite Communication System)

Characteristics of the Waveguide Dehydrator
1. Automatically fills the feeder line system with dry air
2. Maintain a certain pressure to prevent the system from external moisture and water
3. Small size
4. High reliability
5. Easy installation
6. Simple operation

Main Technical Specification of the Waveguide Dehydrator

Type	KC2000A(AC)	KC2000D(DC)
Operating pressure	2.5 ~ 30KPa adjustable	2.5 ~ 30KPa adjustable
Operating voltage	AC 220V±10%. 50~60Hz	DC 48V±15%
Host tightness	After 24 hours pressure maintaining, the pressure has dropped less than 3KPa
Noise	≤45dB(under inflated)	≤45dB(under inflated)
Max air flow	15.litre/min	15. litre/min
Air supply outlet	4	4
Power consumption	Inflated 30VA pressure maintaining 5VA	Inflated 30VA pressure maintaining 5VA
Mtbf	30000 hours
Size	370×260×120mm ( width ×length ×depth )
Weight	About 8kg ( including desiccant and accessory )