ESD Safe Adjustable Constant Temperature Electronic Soldering Iron SMD Rework Station, Item WEP-939BD

The WEP-939BD SMD rework station comes with a sleep mode that can be set to power down within 0-99 minutes. The solder iron will automatically go to sleep once it is put back onto the holder and the temperature will decrease to 200℃. The soldering iron tip and heater have a status self-detection function and the system will automatically power off in case of malfunction or if it exceeds the maximum sleep time.

Parameters

Rated voltage	AC 220V±10% 50Hz
Output power	75W
The thermostat power (rapid PID program-controlled energy saving)	200W±10％
Withstand voltage and insulation tests	AC1500V 0.4A 60S
Working environment	0～40℃ relative humidity＜80％
Storage environment	－20～80℃ relative humidity＜80％
Body size	14.5*12*8CM
Weight	2.17KG
Work voltage	AC 26V±10% 50Hz
Temperature range	200℃～480℃
Temperature Stability	±1℃（Static）
Display type	Red LED display
Temperature correction type	Digital PID correction
PID Temperature correction cycle	100MS
Heating elements	imported heater
Tip ground impedance	＜2Ω
Tip of ground voltage	＜2mV

Features

PID controller performs high-speed 100ms cycle real-time tracking of the temperature of the iron tips and delivers real-time correction. The rapid temperature compensation speed makes the temperature more stable and features a minimal tolerance to adapt to a variety of harsh environments.
The use of an imported heater is not only suitable for general small solder joints, but also particularly suitable for large de-soldering, solder joints, hybrid hard solder de-soldering, etc.
Anti-static design, which can effectively prevent damage to delicate components caused by static or electricity leakage.
Automatic self-detection, and alarm function if detecting any failure or malfunctions.
Brand new sturdy mold manufacturing, pressure-resistant anti-falling ferroalloy iron holder with durable lifespan.
The handle wire adopts silicone material, high temperature resistance with good flexibility, and the silicon wire will not show obvious damage when contacting with the 300 ° C iron tip for 30 seconds.

Standard Configuration
Main unit: 1set
Soldering iron handle (include iron tips and heater): 1pcs
Iron holder: 1pcs
Clean sponge: 1pcs
Instruction book: 1pcs

If you need quick after-sales support

Please don't hesitate to send an email to !