Tool Bits for Self-Feeding Plate Beveller

Send Message Request a Quote

Tool Bits for Self-Feeding Plate Beveller

，。

The tool bits for self-feeding plate beveller are mainlyused for our YWM series steel plate beveller. This cuttingblade works based on the principle of milling. It comeswith a splined hole whichis used to locate the blade.

This circular bladeis made of cutting tool materials by means of later heat treating and linearcutting. It features highly rigid surface. Used tool bits can be continuouslyused for grinding. Nevertheless, when the rigid layer of the surface is groundoff for nothing left, the millingcutter can not support continuous use.

TechnicalParameters

Cutting Tool for YWM-12 Self-Feeding Plate Beveller

Max. bevel width	12mm
Bevel angle	25-45°
Beveling speed	1.5-2m/min
Plate thickness	6-45mm
Plate width	>55mm
Blade work efficiency	800m

Milling Cutter for YWM-16 Self-Feeding PlateBeveller

Max. bevel width	16mm
Bevel angle	25-45°
Beveling speed	1.5-2m/min
Plate width	>70mm

Tool Bits for YWM-2046 Self-Feeding PlateBeveller

Max. bevel width	Once feeding can make bevel 20mm wide and three times feeding 46mm
Bevel angle	15-60°
Beveling speed	0.5-1.5m/min
Plate thickness	12-40 mm
Degree of finish	R3.0-1.2
Blade	Every cutter is equipped with five blades
Blade work efficiency	1200m