Precautions for Installation of Glass Lined Reactor

Glass Lined Equipment Manufacturer

Here are the notes for the installation of glass-lined reactor:

Before installation, make sure no part is missing or broken; Before installation, make sure the glass-lined layer is clean and intact;
During installation, tools like crowbar and hammer should be kept away from the reactor; all installation staff should wear rubber-soled shoes; During installation, make sure the reactor clamp is stressed uniformly; to guarantee the installation quality, no broken parts should be used; Make sure the agitator rotates in the same direction as is shown in the graphical representation; reverse rotation will cause the falling of the agitator, breaking the glass lining. During the rigging (slinging), only the supporting base and the rings can be stressed while fragile parts like the clamp should be lifted softly and crashing. During the installation of the sight glass for the reactor, avoid over-tightening in case the glass will be broken. When the installation is finished, examine every component and the interior before dry run.

In all, make sure every part is installed appropriately and avoid breaking the glass-lined layer so that the reactor can have a longer service live and guarantee the workshop’s production.