IR100DM LED Array IR Illuminator

With the IR output power of 2,500mW, the IR100DE LED array IR illuminator is suitable for use in small indoor areas, 50 square meters. IR100DM's output power is 3,000mW and it can be applied in indoor space with the area of 70 square meters. IR100DR's output power is 3500mW, so it can be used in large indoor areas, 100 square meters.

Our products adopt multi-wafer chip technology and their light emitting angle is 120 degrees. Used indoors, they can give sufficient IR ray in the whole room. They can also be used for small-range monitoring using cameras with poor infrared sensing effect. In addition, using our LED array IR illuminator can avoid the phenomenon of screen exposure caused by too high light intensity.

It is suggested to use IR100DE, IR100DM, and IR100DR in the middle of the interior space, and the interior space is about 3 meters in height. If the height exceeds 5 meters, lighting effect is reduced. Then, it would be better to use barrel-type LED array IR illuminators.

Features
1. Adopt the latest high-density LED array IR chip technology
2. Auxiliary light source for 2.5" indoor or outdoor IR dome camera
3. High performance, low power consumption, service life up to 50,000 hours, eco-friendly lighting
4. IR light emitting angle of 120°, uniform light for indoor applications
5. IR wavelength: 850nm
6. Built-in pulse constant current drive, optimized control circuit, efficiency is improved by more than 45%
7. Multi-fin design to maximize heat dissipation
8. Protection class of IP64
9. When used indoors, our IR100DE, IR100DM, and IR100DR LED array IR illuminators can provide auxiliary light for several cameras in different angles in the same room.
10. Ceiling installation, suitable for indoor short-distance monitoring

Why choose us?
1. Dome type appearance, ceiling installation, compact and lightweight

2. Indoor light source, protection class of IP64

3. Infrared chip from Taiwan TYNTEK and energy-saving circuit, high light intensity, low power consumption, low heat, stable performance, long service life, light attenuation less than 10% within 5 years, particularly suitable for use with a megapixel network camera

4. Our company has set up a strict GB/T19000-ISO9000 quality management system. All products have undergone strict 72-hour high-temperature aging and vibration tests. We can provide the test report issued by Chinese official inspection agency.

5. All electrical components and production process adopt eco-friendly lead-free technology, complying with EU environmental protection standards.

6. Our IR100DE, IR100DM and IR100DR LED array IR illuminators are certified by CE, FCC, and RoHS. We applied for and successfully obtained the patent for the energy-saving circuit technology used on these products in 2007.

7. Since its launch in 2005, over 100,000 units have been sold. Annual shipment is more than 10,000 units. Our products have been in service in more than 30 provinces and cities across China. They have been exported to many countries and regions in Europe, Americas, Middle East and Southeast Asia. There are dozens of OEM and ODM customers at home and abroad. Feedbacks from customers are that our product is compact, stable, and cost-effective. Statistics show that the repair rate within two years after first installation is less than 1% and IR light attenuation is lower than 10%.

8. OEM and ODM services are provided for the IR100DE, IR100DM and IR100DR LED array IR illuminators.

Related Names
Night Vision Infrared Light | Infrared Spotlight | CCTV IR Lamp