Pull-Off Adhesion Tester

TBTDGN-40 Pull-Off Adhesion Tester

TBTDGN-40 pull-off adhesion tester is a dual use tester. It can be used to evaluate strength of concrete (C10~C80) by measuring the required-force to pull off embedded expansion bar from concrete mass, and test bond strength of exterior wall decorative bricks by measuring the pulling force applied to bonded bricks from the substrate.

Technical Parameters

Display mode (unit): kN, Mpa switchable
Hydraulic cylinder stroke: 8mm
Measuring range: 0~40kN
Resolution: 0.001kN
Measurement accuracy: better than 1% (F.S)
Loading peak hold: yes
Data storage: more than 500
LCD lighting: yes
Numerical correction: automatic folding line with high accuracy
Power supply: 8.4V lithium battery
Auto power off function: yes







TBTIB-6000 Pull-Off Adhesion Tester

TBTIB-6000 bond strength tester is a compact portable machine to test adhesive strength of decorative bricks, mosaics, plates, paints, surface coatings on its support and various exterior building materials on external walls. This pull-off adhesion tester also can test bond strength of external insulation materials (EPS board, SPS board).

Technical Parameters

Structure: integrated
Hydraulic cylinder stroke: 10mm
Display mode: KN, Mpa, switchable
Measuring range: 0~10kN
Resolution: 0.001kN
Peak hold: yes
Data storage: more than 500
Main material: high-strength aluminum alloy, lightweight material
Body weight: 2.0kg






Anchor Tensiometer

Model: TBTML-series
Anchor Tensiometer is used for determining the pullout strength of hardened concrete in test specimens or structures by measuring the force required to pull an embedded metal rod, steel bar and the attached concrete fragment from a concrete mass.

For embedded inserts after the concrete hardening, it is available in the kit model 58-C0178/3, that includes a professional electrical drill with suitable power, SDS mandrel, 18mm drill bit for concrete, pack of 10 expanding plugs dia. 18mm x 80mm and manual air pump for dust cleaning. (This apparatus does not match all the requirements of the Standard UNI 10157, EN 12504-3).

Case dimension: 520x430x390mm

Weight approx.: 11kg

TBTML-series pull out test apparatus is suitable for testing the anchorage force of bolt, steel bar, expansion bolt, etc.

Technical Parameters

Model	Cylinder center hole	Cylinder stroke	Test range	Cylinder weight	Anchor size	Pull rod	Conversion head
10T	27mm	60mm	0-100kN	5.5kg	Ø6-20	M18	M6-20
20T	35mm	80mm	0-200kN	13kg	Ø6-25	M24	M6-24
30T	45mm	80mm	0-300kN	15kg	Ø6-32	M30	M6-30
50T	60mm	120mm	0-500kN	25kg	Ø6-40	M39	M6-36
100T	85mm	150mm	0-1000kN	58kg	Ø25-40	M45	M30-39