Platform CNC Waterjet Cutting Machine (Cantilever Type)

Send Message Request a Quote

Platform CNC Waterjet Cutting Machine (Cantilever Type)

Detailed Description
1. Teenking waterjet multipoint lubricating system can lubricate everymoving joint of the TK-Trump-CNC cutting platform, which enables the machine tocontinuously and smoothly perform cutting operations.
2. The unique revolving dustproof design of the CNC waterjet cutting machine effectively protects the interior of the CNC cutting platformand prevents entry of abrasive dust and splashing water, which helps prolongthe service life of all moving parts.
3. Made using advanced technology, Teenking waterjet cutting machine has received two patents.
① Patent No. ZL200820205793.0
Long-screw aligning system can ensure the straightness of ball screw andprevent it from dropping and bending due to its gravity, which eliminates thepossibility of increasing the load of servomotor and accelerating the wear of the screw.
② Patent No. ZL200820205793.0
The nut drive ballscrew design eliminates the resonance and sloshing caused by high speed rotationof ball screw and thus ensures stability of high speed cutting.
4. The ultra-strength support for cutting head effectively reduces the shock ofthe cutting head.
5. The utilization of crash-resistantproximity switches from Switzerland contributes to the reliable operation of the waterjet cutter.
6. The cutting head can tilt /-60 degrees in X direction for cutting, therebywidening the cutting range.
7.The pneumatic water level control system (optional) can help realize cuttingunderwater, thus minimizing noise and spattering.
8. Due to all-stainless steel casing, the cantilever CNC waterjet cutting machine will look like it is new after years of use.

TK-Trump-C0608 Platform CNC Waterjet Cutting Machine(Cantilever Type)

Model		TK-Trump-C0608
Travel of each axis	X-axis	900mm
	Y-axis	700mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	600mm
	Y-axis	800mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW-NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

TK-Trump-C1313 PlatformCNC Waterjet Cutting Machine (Cantilever Type)

Model		TK-Trump-C 1313
Travel of each axis	X-axis	1400mm
	Y-axis	1400mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	1300mm
	Y-axis	1300mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW-NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

TK-Trump-C1530 PlatformCNC Waterjet Cutting Machine (Cantilever Type)

Model		TK-Trump-C 1530
Travel of each axis	X-axis	1600mm
	Y-axis	3000mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	1500mm
	Y-axis	3000mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW -NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

TK-Trump-C1540 Platform CNC Waterjet Cutting Machine (Cantilever Type)

Model		TK-Trump-C 1540
Travel of each axis	X-axis	1600mm
	Y-axis	4100mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	1500mm
	Y-axis	4000mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW -NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

TK-Trump-C1560 Platform CNC Waterjet Cutting Machine (Cantilever Type)

Model		TK-Trump-C 1560
Travel of each axis	X-axis	1600mm
	Y-axis	6100mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	1500mm
	Y-axis	6000mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW-NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

TK-Trump-C1830 PlatformCNC Waterjet Cutting Machine (Cantilever Type)

Model		TK-Trump-C 1830
Travel of each axis	X-axis	1900mm
	Y-axis	3100mm
	Z-axis	220mm /320mm (optional)
Cutting range	X-axis	1800mm
	Y-axis	3000mm
	Z-axis	200mm /300mm (optional)
Drive motor		AC servomotor with coder (Panasonic, Yaskawa , Fuji)
Drive component		X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way Z-axis drive: precise linear slider stage Three-axis full servo drive (available of cutting 3D graphics)
Maximal workpiece weight		4000kg (500kg/m2)
NC control system		TKW-NC Studio three-axis CNC water cutting control system
Control precision		X-axis, Y-axis, Z-axis: 0.001mm
Reposition accuracy		X-axis, Y-axis, Z-axis: less than ±0.04mm
Cutting tolerance		Less than ±0.05mm
Plane straightness accuracy		Less than ±0.05mm
Plane verticality		Less than ±0.04mm/300mm
Moving speed		0-18m/min.
Cutting speed		0-15m/min
Water and dust proof		All moving parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally made using stainless steel.
Protection of power outage		The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
Lubricating system		The fully automatic lubricating system does not need any manual operation, automatically lubricating all moving parts.
Water level control system		Water level control to perform cutting underwater, splashless and noiseless. (optional)
Sludge removal system		The settled sludge is forced toward all directions during the cutting, and then sucked into the sludge removal system via the pre-embedded pipelines. This greatly saves the cost by eliminating manual operation and machine stop time. (optional)
Automatic abrasive supply system		It uses air pressure to continuously, stably deliver abrasive from an externally-mounted container to the cutting head. (optional)

As a China-based platform CNC waterjet cutting machine manufacturer and supplier, at TEENKING we provide not only CNC waterjet cutting machine, but also waterjet cutting system, multifunction waterjet cuttingsystem, and a variety of option accessories of waterjet cutting machine.

Scan QR to Read
Links：https://globefindpro.com/products/98405.html