1. Model of Molded Case Circuit Breaker:
Type | AL66-125 | AL66-250 |
Pole number | 3-4 | 3-4 |
Rated current In(A) | 16-125 16-125 | 25-250 |
2. The electrical characteristics of Molded Case Circuit Breaker:
Rated working voltage Ue(50-60Hz) | 500 | 690 | ||||
Rated working voltage Ue=(V) | 250 | 250 | ||||
Rated insulation voltage Ui~(V) | 500 | 690 | ||||
Rated impulse voltage Uimp(KV) | 6 | 8 | ||||
Usage group | A | A | ||||
Molded case switch type | E |
|
|
| H | L |
Limited breaking capacity(KA) 230/240V- | 22 | 35 | 50 | 60 | 100 | 170 |
400/415V~ | 16 | 25 | 36 | 36 | 70 | 100 |
440V~ | 10 | 18 | 20 | 30 | 60 | 70 |
480/500V~ | 8 | 12 | 14 | 25 | 40 | 40 |
600V~ |
|
|
| 20 | 25 | 25 |
690V- |
|
|
| 16 | 20 | 20 |
250V= | 16 | 25 | 30 | 36 | 40 | 40 |
Used breaking capacity lcos(%Icu) | 100 | 50 | 50 | 100 | 75 | 50 |
Short-circuit closed capacity(400V-) | 32 | 52.5 | 75.6 | 75.6 | 154 | 220 |
Short-time withstand current Icw(KA) |
| |||||
Life (open,close for a time) mechanical | 7000 | 7000 | ||||
Electrical | 1000 | 1000 | ||||
Insulation capacity |
|
|
3. Protection Group of Molded Case Circuit Breaker:
Hot-magnetic trip | |
Electronic trip | |
Take to connect the ground to break | |
Down to probe into the function’ s the | |
High choice electronic-trip | |
Residual current Protected modules | Bottom installation |
On the side installation |
4. Outer Accessories of Molded Case Circuit Breaker:
Control from a distance | O | O |
Fix type | O | Q |
Insert type |
| e |
Drawer type |
| e |
Screw hand handle | Q |
|
Power conversion system |
|
|
5. Dimension & Weight of Molded Case Circuit Breaker:
Dimension (L × W× H) (mrn) 3 pole | 75.6× 120×74 | 105×200× 105 |
4 pole | 101× 120×74 | 140×200× 105 |
Weight(kg) 3 pole | 1 | 2.5 |
4 pole | 1.2 | 3.7 |
We are a leading maker of high quality electroniccomponents such as miniature circuit breaker, earth leakage circuit breaker, ACcontactor, Power relay, etc.