Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T

Suitable for making TPR/PVC/PUR soles and sandals

This injection moulding machine is used to process different materials, like TPR, PVC and PUR and then produce products out of the materials, including single-colour foam or non-foam soles and slippers. What makes this injection press extraordinary is its ability to hold as many as 12 sets of molds, meaning that 12 pairs of shoes can be produced at a time.

Specifications

Item	Unit	EA110Q T	EA112Q T
Raw materials	TPR, PVC, PUR (blowing)
Stations		10	12
Screw diameter	mm	75
Maximum injection volume	CC	880
Injection pressure	MPa	70
Clamping force	Tons	60
Yield	Pairs/hour	100-200	120-240
Mould space	mm	420*350*240
Heating power	kW	9
Total power	kW	36.5
Dimensions	cm	550×260×190	600×300×190
Machine weight	Tons	7.5	8
Oil consumption	L	700
Other configurations	Water cooling system, servo motor and automatic skid system

Optional

Water cooling system

Energy-saving hydraulic servo control system

Mould manipulator

System flow chart Features Wide template design gives enough space for a dozen of molds; Efficient air blowing system is installed to improve the quality and reduce 30% weight of the goods to be made; Screw rod is made through special techniques, which ensures durability; Block cylinder is designed with special structure, providing heat insulation and leakage resistance performance;

PLC control system with industrial human-machine interface (HMI) is easy to use;

PLC system

PLC

HMI interface

Apart from these features, this injection moulding machine is equipped with several other parts to ensure the safety of operators and reduce costs. To be specific, the special designs include:

Safety sign

Safety signSafety door with photoelectric switch

Emergency stop button

Rotary table anti-lifting switch

Servo motor and automatic mould manipulator;

Energy-saving servo motor

Mold water cooling system is installed to speed up the cooling process, so as to improve production rate

Auxiliary Equipment

Cooling tower is installed to lower the temperature of hydraulic oil and raw materials;

Crusher is installed to recycle used materials;

Vertical mixer blends materials with different colours and turn them into the same colour;

Horizontal mixer is installed to mix materials;

Air compressor is connected to the injection moulding machine to supply air;

Drying system is used to dehydrate air so as to avoid bubbles in finished products and make better foam soles;

Accessories and Components

Parts list
Toolbox	/	1pc
Allen key	1.5-10	9 sets
Open-end wrench	6-24	8 sets
Phillips screwdriver (small)	/	2pcs
Phillips screwdriver (large)	/	1pc
Adjustable wrench	250mm	1pc
Heating ring	Ø120*80 mm	2pcs
Heating ring	Ø70*50 mm	1pc
Heating rod	Ø15.8*100 mm	2pcs
Proximity switch	Ø 25*25mm	1pc
Proximity switch	Ø 12*12mm	1pc
Thermoelectric coupling	K type/5M	2pcs
Oil seal	/	2pcs
Plugging rod	/	1pc
Plugging bushing	/	1pc
Copper gasket	/	1pc
Injection nozzle	/	1pc
User manual	/	1

Installation Videos


Tags shoe soles machine
footwear making machine
PVC shoes injection moulding machine