Roll-On Sealing Sleeve

Our roll-on sealing sleeve is RoHS compliant, which is made of EPDM rubber material. The sleeve is filled with special lubricant at the inner side, making it easier to install.

Applications

The roll-on sealing sleeve is used for insulation and sealing, which is to provide protections from salt spray and water moisture. This can also be used for protection from electrical contacts during the periodic inspection, such as the joint protection of mine cables or cables for offshore wind turbines.

Features Our product is reusable and recyclable, which can be installed and removed repeatedly, hence, can provide material cost savings.
The sleeves are heatless sealing products that do not require torches or any heat sources during the installation. The installing process is quick and simple, which is to just roll the sleeve over the area to be protected. Technical Data

Property	Test Method	Standard Value
Ultimate Tensile	ISO 37	≥8.1MPa
Ultimate Elongation	ISO 34	≥8.1MPa
Ultimate Tensile after 136℃×168h	ISO 37	9.5Mpa
Ultimate Tensile after 136℃×168h	ISO 34	719.89
Water Absorption	ISO 62	0.3%
Dielectric Strength	IEC 60243	8kV (mm)
Volume Resistivity	ASTM-D-2303	1.3x1015
Environmental Testing	RoHS	Meet the RoHS
Salt Spray Test	GB2423	No crack with ultimate elongation 770% certified by SGS
Ozone Test	GB7762	No crack certified by SGS.
Low Temperature Ultimate Elongation	-60 ℃x4h	391.4%