Silicone Rubber for LED Extrusion

Applications

This silicone rubber is mainly used for the extrusion of LED neon strips, flexible light strips, LED ribbons, etc.

Features Fast extrusion; High tensile strength; Good processability; Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.

Test

Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa

Technical Data Model: HT-8545S
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 40 Density (g/cm3): 1.13 Tensile strength (Mpa): 7 Elongation (%): 600 Tear strength (K N/m): 15 Model: HT-8555S
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 50 Density (g/cm3): 1.14 Tensile strength (Mpa): 7 Elongation (%): 500 Tear strength (K N/m): 15 Model: HT-8565S
Appearance: Translucent Processability: 230-260 Hardness (Shore A): 60 Density (g/cm3): 1.15 Tensile strength (Mpa): 7 Elongation (%): 400 Tear strength (K N/m): 15 Model: HT-8575S
Appearance: Translucent Processability: 260-280 Hardness (Shore A): 70 Density (g/cm3): 1.2 Tensile strength (Mpa): 7 Elongation (%): 300 Tear strength (K N/m): 15 Model: HT-8585S
Appearance: Translucent Processability: 250-280 Hardness (Shore A): 80 Density (g/cm3): 1.2 Tensile strength (Mpa): 7 Elongation (%): 200 Tear strength (K N/m): 15