Combined Inverter Charger

The inverter charger offers a hybrid system that combines solar energy and commercial power while providing users with the flexibility of choosing the form of energy according to their needs. It features mains/diesel and solar charging, mains bypass and inverter output, and energy management and control, allowing users to maximize their use of solar energy while supplementing with commercial power if needed. This product ensures a reliable and secure power supply with its high-quality, high-stability, and high-reliability outputs, making it ideal for use in solar energy and commercial power/diesel generator hybrid power generation systems.

Features Two operating modes: battery-powered mode and non-battery powered mode.
Solar energy is the primary source of power when there is no battery storage available. When necessary, the mains supply is used to supplement, ensuring the load requirements are met.
The lithium battery application system is perfectly complemented by the anti-surge and anti-reverse protection at the battery end.
Choose from three charging modes: solar-only, solar priority, and solar-main power combination.
Two AC output modes: mains supply priority and inverter output priority.
Using advanced MPPT technology, this inverter charger boasts a tracking efficiency of at least 99.5%, ensuring maximum power production and efficiency.
Power Factor Correction (PFC) technology to optimize AC-DC power charging and significantly reduce the strain on power grid capacity. SPWM technology produces a pure sine wave output.
The total charge and discharge current of the battery can be preset, making it ideal for occasions requiring a battery current limit.
The amount of mains charging can be tailored and adjusted to fit your needs, with the ability to set the rate of mains charging current.
Self-learning SOC display function
For those seeking to monitor remotely, pairing the RS485 communication interface with GPRS, WIFI, and other modules can provide an effective solution.
Using the BMS-Link communication interface and conversion module, it is possible to achieve charge and discharge control via the BMS. Technical Parameters

Model	UP2000-HM6022	UP3000-HM10022		UP3000-HM5042	UP5000-HM8042
Rated battery voltage	24VDC			48VDC
Battery input voltage	21.6~32VDC			43.2~64VDC
Max. battery charge current	60A	100A		50A	80A
Inverter Output
Continuous output power	2000W	3000W	3000W		5000W
Max. surge power (3s)	4000W	6000W	6000W		8000W
Output voltage	220VAC(-6%~ 3%), 230VAC(-10%~ 3%)
Output frequency	50/60±0.2%
Output waveform	Pure sine wave
Load power factor	0.2-1 (load power ≤ continuous output power)
Total harmonics distortion (THD)	THD≤3% (resistive load)
80% rated output efficiency	92%	92%	92%		92%
Max. rated output efficiency	91%	91%	90%		91%
Max. output efficiency	93%	93%	93%		93%
Switch time	10ms (switch from the utility output to the inverter output) 15ms (switch from the inverter output to the utility output)
Utility Charging
Utility input voltage	176VAC~264VAC(default), 90VAC～280VAC (programmable)
Utility input frequency	40～65Hz
Max. utility charge current	60A(when the utility input voltage is 90VAC~180VAC, the max. utility charge current is 30A)	80A(when the utility input voltage is 90VAC~180VAC, the max. utility charge current is 40A)	40A(when the utility input voltage is 90VAC~180VAC, the max. utility charge current is 20A)		60A(when the utility input voltage is 90VAC~180VAC, the max. utility charge current is 30A)
Solar Charging
Max. PV open circuit voltage	450V (at minimum environment temperature) 395V (25℃ environment temperature)				500V (at minimum environment temperature) 440V (25℃ environment temperature)
MPPT voltage range	80~350V				120~400V
Max. PV input power	2500W	4000W	4000W		4000W
Max. PV charge power	1725W	2875W	2875W		4000W
Max. PV charge current	60A	100A	50A		80A
Equalization voltage	29.2V (default AGM battery type)		58.4V (default AGM battery type)
Boost voltage	28.8V (default AGM battery type)		57.6V (default AGM battery type)
Float voltage	27.6V (default AGM battery type)		55.2V (default AGM battery type)
Low voltage disconnect voltage	21.6V (default AGM battery type)		43.2V (default AGM battery type)
Tracking efficiency	≥99.5%
Temperature compensate coefficient	-3mV/℃/2V (default)
General
Surge current	50A	60A	56A		95A
No-load consumption	< 1.8A		< 1.2A
Standby current	< 1.2A		< 0.7A
Mechanical Parameters
Dimensions (H×W×D)	607.5×381.6×127mm	642.5×381.6×149mm	607.5×381.6×149mm		642.5×381.6×149mm
Mounting size	585×300mm	620×300mm	585×300mm		620×300mm
Mounting hole size	Ø10mm	Ø10mm	Ø10mm		Ø10mm
Net weight	15kg	19kg	18kg		19kg
Enclosure	IP30
Environment temperature	-20℃~50℃