EP-R2 General Purpose End Mill - Corner Radius - 2 Flutes
Request a quote
Tags: end mills for aluminum alloys
corner rounding end mills
drilling tools
chamfering tools
Unit: mm
| Order Code | Cutting Diameter (D) | Length of Cut (Lc) | Corner Radius (r) | Overall Length (L) | Shank Diameter (d) | Type |
| EP-R2-01002 | 1 | 3 | 0.2 | 50 | 4 | A |
| EP-R2-01502 | 1.5 | 4 | 0.2 | 50 | 4 | A |
| EP-R2-02002 | 2 | 6 | 0.2 | 50 | 4 | A |
| EP-R2-03002 | 3 | 9 | 0.2 | 50 | 4 | A |
| EP-R2-03005 | 3 | 9 | 0.5 | 50 | 4 | A |
| EP-R2-04002 | 4 | 11 | 0.2 | 50 | 4 | A |
| EP-R2-04005 | 4 | 11 | 0.5 | 50 | 4 | A |
| EP-R2-63002 | 3 | 9 | 0.2 | 50 | 6 | A |
| EP-R2-63005 | 3 | 9 | 0.5 | 50 | 6 | A |
| EP-R2-64002 | 4 | 11 | 0.2 | 50 | 6 | A |
| EP-R2-64005 | 4 | 11 | 0.5 | 50 | 6 | A |
| EP-R2-05002 | 5 | 13 | 0.2 | 50 | 6 | A |
| EP-R2-05005 | 5 | 13 | 0.5 | 50 | 6 | A |
| EP-R2-06005 | 6 | 16 | 0.5 | 50 | 6 | B |
| EP-R2-06010 | 6 | 16 | 1 | 50 | 6 | B |
Type A: the cutting diameter is smaller than the shank diameter
Type B: the cutting diameter is equal to the shank diameter
corner rounding end mills
drilling tools
chamfering tools
Scan QR to Read
Links：https://globefindpro.com/products/4511.html
Links：https://globefindpro.com/products/4511.html
Recommended Products
-
Double-sided Trigon Inserts for Shoulder Milling
-
A-R2/RS2/RL2 Solid Carbide End Mill for Aluminum Alloy Machining - Corner Radius - 2 Flutes
-
H-S4 Solid Carbide End Mill for Hardened Steel Machining - Square End - 4 Flutes
-
S-SS4 Solid Carbide End Mill for Stainless Steel Machining - Square End - 4 Flutes - Short Flute
-
S-S2 Solid Carbide End Mill for Stainless Steel Machining - Square End - 2 Flutes
-
G-S4 Solid Carbide End Mill for Graphite Machining - Square End - 4 Flutes
-
Single-sided Square Indexable Drill Inserts for Shallow Hole Drilling
-
EP-B2 General Purpose End Mill - Ball Nose - 2 Flutes
-
ES-S2 General Purpose End Mill for Stainless Steel Machining - Square End - 2 Flutes
-
G-B2 Solid Carbide End Mill for Graphite Machining - Ball Nose - 2 Flutes
-
Double-sided Square Carbide Inserts for Face Milling (with 45°/75°/88° Cutting Edge Angle)
-
Carbide Drill Bits
Hot Products
