Radial Linear Guideway

The GGD radial linear guideway is made of bearing steel and is comprised of a rail, slide block, roller, reverse unit, top seal, side seal, roller cage, seal gasket, oil cup, etc. The radial linear guideway withstands force perpendicularly in the radial direction, so its radial load carrying capacity is greatly increased. Improvement on the fitness of raceway and roller helps improve the load carrying capacity and rigidity of each raceway. The radial linear guideway offers a reduced overall height and the optimizing structure with finite element analysis enables the mutual force points of four raceways to be reduced to the best. We not only get guideway with higher anti torsion ability and slide block with higher anti deformation ability, but are able to save space for users.

The radial linear guideway is designed with a roller cage to keep rollers apart and avoid collision. This makes the rollers move smoothly and stably and avoids noise caused by roller collision. There is an oil layer between roller and cage, which helps to reduce friction and heat generated by the linear guideway during moving. This ensures high speed and high accuracy motion. In addition, as a certain amount of lubricating grease can be stored in the roller cage, the radial linear guideway will be maintenance free for a long period of time.

Technical Specifications
Seal Type and Dimension Increase

Seal code	Seal type	Amounting Dimension L1 Increase(mm)
		GGD35	GGD45	GGD55	GGD65
MM	End seal	+0	+0	+0	+0
MN	End seal+side seal	+0	+0	+0	+0
MX	End seal+side seal + scraper	+2	+2.5	+3	+3
MY	Tighten-end seal+side seal	+2.5	+2.5	+3	+3
MZ	Tighten-end seal+side seal+scraper	+4.5	+5	+6	+6

NOTE
1. L dimensions are for the normal seal type MN. For details please see seal type.
2. GGD series AA/AAL block is the flange type, and top mount hole is thread hole, up-lock see dimension M, down-lock see dimension Ф
3. Side-view of standard block AA and lengthened AAL type is shown here.
4. Please let us know if you need oiling from side surface.

Type	Dimension of Assembly		Dimension of Block										Dimension of Rail
	H	W	B1	B3	K	L0	T1	M	Ф	L1	L2	L3	B2	H1
GGD35AA GGD35AAL	44	33	100	82	35	14	20	M10	8.5	116.4 138.4	86 108	62	34	24.2
GGD45AA GGD45AAL	52	37.5	120	100	43.1	20	22	M12	10.5	139.4 174	106 137	80	45	29
GGD55AA GGD55AAL	63	43.5	140	116	49	22	24	M14	12.5	163 203	124 161	95	53	36.5
GGD65AAL	75	53.5	170	142	60	25	28	M16	14.5	255.5	207	110	63	43

			Dimension of Oil Cup			Dynamic Load Rating	Static Load Rating	Torque Rating
d × D × h	F	Max. Single Length	G	P	N	C(KN)	CO(KN)	MA(Nm)	MB(Nm)	MC(Nm)
9×14×12	80	6000	M6	8.8	8	76 91	121 167	1338 2258	855 1416	1807 2366
14×20×16	105	6000	M8	15	10	112 133	183 235	2767 4566	1725 2844	3569 4777
16×23×20	120	6000	M8	15	11	143 174	244 321	4255 7142	2642 4435	5684 7420
18×26×22	150	6000	M8	15	16	279	481	13022	8363	13143

NOTE
1. L dimensions are for the normal seal type MN, for details please see seal type.
2. GGD series BA/BAL block is the narrow type, and top mount hole is screw hole.
3. Side-view of standard block BA and lengthened BAL type is shown here.
4. Please let us know if you need oiling from side surface.

Type	Dimension of Assembly		Dimension of Block								Dimension of Rail
	H	W	B1	B3	K	T	M × L0	L1	L2	L3	B2	H1
GGD35BA GGD35BAL	44	18	70	50	35	12	M8 ×12	116.4 138.4	86 108	50 72	34	24.2
GGD45BA GGD45BAL	52	20.5	86	60	43.1	14.7	M10 ×15	139 174	106 137	60 80	45	29
GGD55BA GGD55BAL	63	23.5	100	65	49	17.7	M12 ×17	163 203	124 161	75 95	53	36.5
GGD65BAL	75	31.5	126	76	60	21	M16 ×20	255.5	207	110	63	43

			Dimension of Oil Cup			Dynamic Load Rating	Static Load Rating	Torque Rating
d × D × h	F	Max. single length	G	P	N	C(KN)	CO(KN)	MA(Nm)	MB(Nm)	MC(Nm)
9×14×12	80	6000	M6	8.8	8	76 91	121 167	1338 2258	855 1416	1807 2366
14×20×16	105	6000	M8	15	10	112 133	183 235	2767 4566	1725 2844	3569 4777
16×23×20	120	6000	M8	15	11	143 174	244 321	4255 7142	2642 4435	5684 7420
18×26×22	150	6000	M8	15	16	279	481	13022	8363	13143

NOTE
L dimensions are based on MN seal type. For details please see seal type.
BA/BAL blocks of GZB series are narrow-high type and top mounting holes are thread holes.
There are three rows, a total of 9 mounting holes on the top of GZB85, GZB100,GZB125 block. The holes are symmetrically distributed in the top L3, B3 directions.
Please let us know if you need oiling from side surface.

Our company is a professional radial linear guideway manufacturer based in China. Apart from linear guide, we also provide linear motion spline, precision ball screw, linear motion bushing, CNC worktable, and much more.