Special Engine Repair Tools

Hydraulic Pulley Wheel Installing Device This maintenance tool is used for pulling and pressing damaged machines or equipment.

Belt Tensioner 1. Applied to tension and disassemble the pulley belt; 2. Force: 5 tons, pulling diameter: Ø80mm-150mm

Hydraulic cylinder liner pull starter 1.Used to mount and remove dry cylinder liner directly on vehicle; 2. Inverse pull for installation of cylinder, take full use of space; 3. Double segment oil pump creates high pressure, high pulling speed; 4. Stroke: 230mm, Max.: force: 15 tons; specification of starter: 112mm, 126mm (can be added puller to suit various engine) 5. Height of spindle: 750mm, loading capacity: 1000kg, drive ratio: 100:1

Mechanical cylinder liner pull starter 1. Suitable for dry or wet cylinder liner 2. Diameter of starter: Ø105, Ø108, Ø110, Ø112, Ø113, Ø120

Connecting Rod Liner Reaming Rolling Kits 1. With two adjustable reamings (ø38-44, ø44-52.), three rollers 3. Make the liner wear-resistant with smoothness of 0.8 and more 4. Suitable for large, middle and light engine.

Camshaft bush machining tools 1. Used to change and manually bore the camshaft bush 2. Easy to operate, ensure the high quality of boring and the same spindle degree of the bush pore

Electric Diesel Engine Trouble Diagnosis Device Applicable for malfunction detector of the engine which include Bosch common rail system, Delphi unit pump system, Delphi common rail system, etc.

Multifunction electric heating washing machine 1. Can set pure steam cleaning, high pressure water cleaning and mixing cleaning of steam and water at the same time; the pressure, temperature and water content of the steam can be adjusted; 2. Under the steam station of 150℃, the oil, ash, mud on the machine surface without water splashing, damage of electric elements caused by water entry 3. Power: 12 k, working pressure of water:120kg/cm3 , working pressure of steam: 0.8 Mpa, steam temperature: 171℃