Platinum Cured Silicone Rubber

This product has been discontinued and removed from our shelves.

Applications

Our platinum cured silicone rubber is suitable for manufacturing of O-rings, washers, gaskets, etc.

Features Rapid vulcanization;
Easy de-molding;
Non-yellowing;
Good resilience;
Suitable for mechanical edge finishing; Approvals

ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.

Test

Addition A type agent 0.5%, B type agent 0.8%, 120℃×3min×15Mpa

Technical Data Model: HT-8130
Appearance: Translucent Processability: 200-200 Hardness (Shore A): 30 Density (g/cm3): 1.12 Tensile strength (Mpa): 7 Elongation (%): 850 Tear strength (K N/m): 15 Model: HT-8140
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 40 Density (g/cm3): 1.13 Tensile strength (Mpa): 7 Elongation (%): 750 Tear strength (K N/m): 20 Model: HT-8150
Appearance: Translucent Processability: 220-240 Hardness (Shore A): 50 Density (g/cm3): 1.14 Tensile strength (Mpa): 7 Elongation (%): 650 Tear strength (K N/m): 15 Model: HT8160
Appearance: Translucent Processability: 230-260 Hardness (Shore A): 60 Density (g/cm3): 1.15 Tensile strength (Mpa): 7 Elongation (%): 550 Tear strength (K N/m): 15 Model: HT-8170
Appearance: Translucent Processability: 260-280 Hardness (Shore A): 70 Density (g/cm3): 1.2 Tensile strength (Mpa): 7 Elongation (%): 450 Tear strength (K N/m): 15 Model: HT-8180
Appearance: Translucent Processability: 250-280 Hardness (Shore A): 80 Density (g/cm3): 1.2 Tensile strength (Mpa): 7 Elongation (%): 300 Tear strength (K N/m): 15 Model: HT-8190
Appearance: Translucent Processability: 260-290 Hardness (Shore A): 90 Density (g/cm3): 1.22 Tensile strength (Mpa): 7 Elongation (%): 200 Tear strength (K N/m): 15