SC-KVM-1301DP Scaler Switcher

Send Message Request a Quote

Our SC-KVM-1301DP scaler switcher integrates video signal scaling and switching. It is able to scale and switch many types of input video signals, including composite video (CV), component video (Pr/Cr, Pb/Cb, Y), VGA, and HDMI signals, to unified VGA or HDMI/DVI signals.

This scaler switcher supports microphone signal input, KVM function, and multiple control modes. It is often used for TV teaching, multimedia presentation, large screen display, and other occasions.

Technical Parameters

Model	SC-KVM-1301DP
Analog Composite Video
Gain	0 dB
Bandwidth	150MHz@-3dB
Format	NTSC, PAL, SECAM
Differential phase error	0.1°, 3.58-4.43 MHz
Differential gain error	0.1%, 3.58-4.43 MHz
Switching speed	200 ns (maximum duration)
Signal type	Composite video (CVBS)
Connector	RCA female connector
Signal intensity	1Vpp: CVBS
Minimum / maximum level	Analog signal: -2V/ 2V
Impedance	75 Ω
Return loss	<-30dB@5MHz
Analog YPbPr Video
Gain	0 dB
Bandwidth	350MHz@-3dB
Format	NTSC, PAL, SECAM
Differential phase error	0.1°, 3.58-4.43 MHz
Differential gain error	0.1%, 3.58-4.43 MHz
Switching speed	200 ns (maximum duration)
Signal type	Composite video (CYPbPr/YCbCr)
Connector	RCA female connector
Signal intensity	1Vpp: Y component video0.3Vpp: PbPr/CbCr component video
Minimum / maximum level	Analog signal: -2V/ 2V
Impedance	75 Ω
Return loss	<-30dB@5MHz
Analog VGA Video
Gain	0 dB
Bandwidth	380MHz
Signal type	VGA
Connector	15-pin HD female connector
Signal intensity	0.63Vpp ~ 0.9Vpp
Impedance	75 Ω
Return loss	<-40dB@5MHz
DC offset	Max. ±5mV
Resolution supported	640×480@60Hz, 800×600@60Hz, 1024×768@60Hz, 1280×720@60Hz, 1280×1024@60Hz, 1600×1200@60Hz, 1920×1080P@60Hz, 1920×1200P@60Hz
VGA Synchronization Signal
Input / output signal type	RGBHV, RGBS, RGsB, RsGsBs
Input Level	5.0Vpp, 4.0Vpp normally
Output Level	AGC-TTL: 5Vpp, unterminated
Input impedance	510 Ω
Output impedance	75 Ω
Maximum transmission delay	Horizontal: 90nsVertical: 160ns
Maximum rise / fall time	4ns
Polarity	Positive or negative (fully consistent with the input)
HDMI Video Input
Protocol supported	HDMI1.3a, DVI1.0, HDCP1.3
Pixel bandwidth	165MHz, full digital
Interface bandwidth	2.25Gbps, full digital (a total of 6.75Gbps, 2.25Gbps per color)
Maximum resolution supported	HDPC: 1900×1200@60Hz Normal PC: 1600×1200@60Hz HDTV: 1920×1080P@60Hz
Bit clock jitter	<0.15 Tbit
Rise time	<0.3Tbit (20%-80%)
Fall time	<0.3Tbit (20%-80%)
Signal type	HDMI / DVI-D full digital T.M.D.S. signal defined in HDMI 1.3a / DVI 1.0 specification
Interface	HDMI-A connector (Type A connector)
Signal intensity	T.M.D.S. /- 0.4Vpp
Minimum / maximum level	T.M.D.S. 2.9V/3.3V
Impedance	50 Ω
Input EDID	Use default EDID, support terminal EDID mapping to the input terminal
Max. DC offset error	15mV
Resolution supported	800×600P@60Hz, 720×480P@60Hz, 1280×720P@60Hz, 1920×1080i@60Hz, 1920×1080P@60Hz,1920×1200P@60Hz, 1024×768P@60Hz, 1280×1024P@60Hz, 1600×1200P@60Hz
Recommended maximum input distance	<25m at 1920×1080@60Hz, recommended to use certified HDMI dedicated wire, such as Molex TM wire
HDMI Video Output
Interface	HDMI-A connector (Type A connector)
Minimum / maximum level	T.M.D.S. 2.9V/3.3V
Impedance	50 Ω
Protocol supported	HDMI1.3a, DVI1.0, HDCP1.3
Pixel bandwidth	165MHz, full digital
Resolution supported	800×600P@60Hz, 720×480P@60Hz, 1280×720P@60Hz, 1920×1080i@60Hz, 1920×1080P@60Hz, 1920×1200P@60Hz, 1024×768P@60Hz, 1280×1024P@60Hz, 1600×1200P@60Hz
Recommended maximum output distance	<10m at 1920×1080@60Hz, recommended to use certified HDMI dedicated wire, such as Molex TM wire
VGA Video Output
Gain	0 dB
Bandwidth	380MHz
Signal type	VGA
Interface	DB15 female connector
Signal intensity	0.63Vpp - 0.9Vpp
Impedance	75 Ω
Return loss	<-40dB@5MHz
DC offset	Max.: ±5mV
Resolution supported	800×600P@60Hz, 720×480P@60Hz,, 1280×720P@60Hz, 1920×1080i@60Hz, 1920×1080P@60Hz, 1920×1200P@60Hz, 1024×768P@60Hz, 1280×1024P@60Hz, 1600×1200P@60Hz
Audio Signal
Input / output interface	8 3.5mm unbalanced stereo audio connectors
Gain	0 dB
Frequency response	20 Hz ~ 20 kHz,
Total harmonic distortion noise	0.05% @ 1 kHz (at rated voltage)
SNR	>80dB
Stereo separation level	>80dB @ 1 kHz
Common mode rejection ratio (CMRR)	>75dB @: 20 Hz ~ 20 kHz
Signal type	Stereo (unbalanced connection)
Impedance	Input: >10 kΩ (balanced or unbalanced connection method)Output: 50 Ω (unbalanced connection), 100 Ω (balanced connection)
Maximum input level	19.5dBu, balanced or unbalanced connection method
Gain error	±0.1dB @20 Hz ~ 20 kHz
MIC
MIC type	Moving coil induction
Input sensitivity	25mV
Frequency response	50Hz-16KHz
Connector type	Mono input
USB Control Signal
Transmission distance and speed	Full-speed: 75M of 12MbpsLow-speed: 300M of 1.5Mbps
Supported protocol	USB2.0
Level	High level: 5V; low level: 0.5V
Control Function
Serial control interface	RS-232, 9-pin D-type female connector
Baud rate and protocol	Baud rate: 9600, date bit: 8 bits, stop bit: 1, no parity bit
Serial control port structure	2 = TX, 3 = RX, 5 = GND
Ethernet control interface	RJ-45 female connector (control interface accessories optional)
Ethernet control protocol	TCP/IP
Ethernet control rate	Adaptive 10M or 100M, full-duplex or half-duplex
Specification
Power supply	12V DC adapterInput: 100-240V/2AOutput: 12V /6.67APower: 80W Max.
Static power consumption	9.5W
Maximum power consumption	13W
Temperature	Storage and operating temperature: -20 ℃ ~ 70 ℃
Humidity	Storage and operating humidity: 10% - 90%
Dimensions (mm)	483(L) × 260(W) × 43.6(H)
Weight	About 1.9kg
Mean time between failures	30,000 hours
Warranty	1 year free warranty and lifetime maintenance

Related Names
KVM Matrix Switch | Matrix Switcher | Video Splitter

Scan QR to Read
Links：https://globefindpro.com/products/78778.html