Pt-RGB3232-A RGB Switcher

Send Message Request a Quote

The Pt-RGB3232-A RGB switcher is an audio and video matrix switcher which supports 32-channel audio and video signal input as well as 32-channel audio and video signal output. It is able to switch the input 32-channel RGB signals and stereo audio signals to one or multiple output channels in synchronous or asynchronous mode.

We also offer other three models of RGB switcher with 8, 16, and 24 output channels respectively, Pt-RGB3208-A, Pt-RGB3216-A, and Pt-RGB3224-A.

Technical Parameters

Model	Pt-RGB3232-A, Pt-RGB3224-A, Pt-RGB3216-A, Pt-RGB3208-A
Video
Gain	0 dB
Bandwidth	450MHz (-3dB), full load0 - 10MHz @ 0.1dB0 - 100MHz @ 0.6dB
Crosstalk of multi-channel to one channel	-56dB@10M, -40dB@100M
Differential phase	I/0S<1.28°, 3.58MHz
Differential phase error	0.1°, 3.58-4.43MHz
Differential gain error	0.1%, 3.58-4.43MHz
Maximum transmission delay	5ns (±1ns)
Switching speed	200 ns (max. duration)
Signal type	RGBHV, RGBS, RGsB, RsGsBs, HDTV, YCbCr/YPbPr component video, S-video, composite video (CVBS)
Video Input
Interface	BNC female connector
Signal intensity	1Vpp: component video, S-video Y component, composite video0.3Vpp: Cb/Pb or Cr/Pr component video, S-video C component
Minimum / maximum level	0.5Vpp / 2.0Vpp (analog signal)
Impedance	75 Ω
Return loss	-30dB@5MHz
Maximum DC offset error	15mV
Video Output
Interface	BNC female connector
Minimum / maximum level	0.5Vpp / 2.0Vpp (analog signal)
Impedance	75 Ω
Return loss	-30dB@5MHz
DC offset	±5mV
Synchronization Signal
Synchronization Signal	RGBHV, RGBS, RGsB, RsGsBs
Input level	0.5V - 5.0Vpp, 4.0Vpp (normal)
Output level	AGC-TTL: 5Vpp, no load (unterminated）
Input impedance	510 Ω
Output impedance	75 Ω
Polarity	Positive or negative (fully consistent with the input)
Audio Signal
Input / output interface	5-pin 3.8mm Phoenix connector
Gain	0dB
Frequency response	20 Hz - 20 kHz,
Total harmonic distortion noise	0.03% @ 1 kHz, at rated voltage
SNR	>90dB
Stereo separation level	>80dB @ 1 kHz
Common mode rejection ratio (CMRR)	>75dB @: 20 Hz - 20 kHz
Signal type	Stereo, balanced or unbalanced connection method
Impedance	Input: >10 kΩ (, balanced or unbalanced connection method)Output: 50Ω (unbalanced connection), 100Ω (balanced connection)
Maximum input level	19.5dBu, balanced or unbalanced connection method
Maximum output level	19.5dBu, balanced or unbalanced connection method
Gain error	±0.1dB
RS-232 Control Interface
Serial control interface	RS-232, 9-pin D-type female connector
Baud rate and protocol	Baud rate: 9600, date bit: 8 bits, stop bit: 1, no parity bit
Serial control port structure	2 = TX, 3 = RX, 5 = GND
Keyboard Control Interface
Control interface	4-pin Phoenix connector
Usage mode	Used in conjunction with the Pt-MCP100 extended keyboard
Control port structure	5V=DC5V , = DATA , - =DATA-, GND = Signal Ground
Ethernet Control Interface
Ethernet control interface	RJ-45 female port
Ethernet control protocol	TCP/IP
Ethernet control rate	Adaptive 10M or 100M, full-duplex or half-duplex
Specification
Power supply	100VAC ～ 240VAC, 50/60 Hz, international adaptive power
Temperature	Storage and operating temperature: -20 ℃ - 70 ℃
Humidity	Storage and operating humidity: 10% - 90%
Dimensions (mm)	483L × 290W × 532.6H
Weight	About 12kg
Max. power consumption	≤25W
Mean time between failures	30,000 hours
Warranty	1 year free warranty and lifetime maintenance

Related Names
RGB Matrix Switcher | Audio Video Matrix Switch | Matrix Switching Equipment

Scan QR to Read
Links：https://globefindpro.com/products/78774.html