Wireless Charging Kit

Send Message Request a Quote

The wireless charging kit supplied by CE-LINK comprises a wireless charging base and three wireless charging receivers. The wireless charging base is suitable for all wireless-charging mobile phones with QI agreement. In addition, a wireless-charging receiving coil is needed to achieve wireless charging function.

Characteristics
1. A wireless charging base allows mobile phones to get rid of cable twisting. Users can answer their calls and charge batteries at any time. Mobile phones will not be damaged by plugging and unplugging.
2. The round-shaped base is fit for different shapes of mobile phones. It allows two mobile phones to be charged simultaneously. Only a single unit is available for wireless charging.
3. Both surface and bottom of the wireless charging kit adopt non-slip design. They are suitable for any kind of surface of mobile phones.
4. Beveled design allows the base to replace a phone stand. Then, users can play with their mobile phones while simultaneously charging.
5. These mobile wireless charging products can be directly connected to desktop PCs, laptops, or mobile phone adapters for intelligent inductive charging. Both high-quality coil and high-speed charging are available.
6. The wireless charging kit is categorized into three types, including the ultra thin QI wireless charging receiver for S3, the ultra thin QI wireless charging receiver for S4, and the ultra thin QI wireless charging receiver for Note 2.
7. Ultra-thin design causes no significant projections of back cover of mobile phones after installation
8. Low operating temperature
9. Output short-circuit protection
10. Reliable and easy installation
11. Large output current helps shorten the charging time of mobile phones.

Model: 5w QI Wireless Charging Pad (WPC01)

Parameters
Input Power Supply: DC 5V, 1A~3A
Output Voltage: 4.75-5.2V
Output Current: 0.1~1A max.

Model: Ultra thin QI Wireless Charging receiver for S3 (WPC-S3)

Parameters
Output Voltage: 4.75-5.0V
Output Current: 0.1~0.7A (0.8A max.)
Working Efficiency: >60%
Dimension: 60.8*50.3mm thickness 0.8 -1.4mm
Weight: Approximately 3.3g

Model: Ultra thin QI Wireless Charging receiver for S4 (WPC-S4)

Parameters
Output Voltage: 4.75-5.0V
Output Current: 0.1~0.7A (0.8A max.)
Working Efficiency: >60%
Dimension: 62*54.5mm Thickness 0.6-1.2mm
Weight: Approximately 2.9g

Model: Ultra thin QI Wireless Charging receiver for S3(WPC-NOTE2)

Parameters
Output Voltage: 4.75-5.0V
Output Current: 0.1~0.7A (0.8A max.)
Working Efficiency: >60%
Dimension: 68.3*60.3mm
Thickness 0.8-1.4mm
Weight: Approximately 3.8g

Operation Steps (S3 for example)

1. Open a back cover of your S3.
2. Let two protuberant touch points of the receiver touch two recesses next to the battery.
3. Close the original back cover.
4. Place the mobile phone onto a wireless charging pad. The pad is not included, but you can find it in our company if needed.

	Model	Receiver Installation Method
Samsung	S3 (9300/9308)	Built-in (reserved interface, receiver coil needed)
	S4	Built-in (reserved interface, receiver coil needed)
	NOTE2 (7100/7102)	Built-in (reserved interface, receiver coil needed)
	NOTE3	Built-in (unlisted)
Nokia	Lumia 1020	Built-in (replaceable battery cover)
	Lumia 925	Built-in (replaceable battery cover)
	Lumia 928	Built-in
	Lumia 920	Built-in
	Lumia 820	Built-in (replaceable battery cover)
	Lumia 720	Built-in (replaceable battery cover)
HTC	Droid DNA (US version)	Built-in
	Butterfly (US version)	Built-in
	Incredible 4g lte	Built-in
	8X	Built-in
Google (LG)	Nexus4	Built-in
LG	D1L	Built-in
	Lte2	Built-in (replaceable battery cover)
SHARP	SH-07D	Built-in
	SH-02D	Built-in
	SH-13C	Built-in
Fujitsu	ARROWS X F-10D	Built-in
	F-09D ANTEPRIMA	Built-in
Panasonic	ELUGA V P-06D	Built-in
	P-02E	Built-in
IPHONE	IPHONE 4/4s	Externally installed (wireless charging case)
	IPNONE 5	Externally installed (wireless charging case)
BBK	Vivo x1	Externally installed (wireless charging case)
Remark	Built-in (reserved interface, receiver coil installed) means that the wireless charging function can be realized only by independently purchasing a wireless charging receiver.
	Built-in (replaceable battery cover) is referred to the standard back cover without wireless charging function. If the wireless charging function is needed, a wireless charging back cover should be purchased to replace the original back cover.
	Built-in means that the standard configuration of mobile phones of leaving factory supports wireless charging function.
	Externally installed wireless-charging case means that the original back cover of mobile phones does not need to be removed. Direct addition of the wireless charging case can realize wireless charging function.

Scan QR to Read
Links：https://globefindpro.com/products/78786.html