VGA Extender 1X2 Splitter

VGA UTP Extender 1X2 Splitter with Audio (Sender)

Model: VRP01 & VSP0102-S

Introduction
1. The VGA extender 1X2 splitter of CE-LINK supports VGA video/audio signal transmission of up to 300m through CAT5 unshielded twisted pair. After extension, it gives a clear and natural image restoration effect.
2. This UTP extender device features long-distance extension. Its image effect is not reduced obviously, and the image display is not delayed.
3. A pair ofVGA signal extender is generally ideal for household or commercial uses. It adopts fast and economical twisted pair to substitute for expensive and huge VGA signal lines. Also, it allows a VGA signal monitor to be connected with PC port through standard twisted-pair extension.
4. The VGA extender 1X2 splitter is characterized by superb stability and clear image. It is widely applied in the computer field, supervisory control, security protection, multimedia teaching system, presentation hall, ticket booth, billboard, overhead projection system, PC system, PC backplane, and more.

Features
1. In use of the VGA extender 1X2 splitter,VGA video and stereo audio signal can be extended up to 300m over one UTP cable with cross stand inside.
2. GAIN and PEAK can be adjusted to suit for different length of UTP cable. GAIN means brightness adjustment, and PEAK is referred to skew adjustment.
3. The maximum resolution supported by our product reaches 1920x1200.
4. Available dual output at local unit includes 1xVGA output for local site, plus 2xUTP output for remote site.
5. Our twisted pair extender can be used together with monitors, projectors, HDTV, and flat panels.

Note: Specifications are subject to change without notice.

Packing
Prior to the use of our product, please check the package to make sure that a shipping carton should accommodate the following items.
1. VGA extender 1X2 splitter
2. User's Manual
3. One or two Receivers, as per customer requirements
4. One piece of 5V@2A DC Power Supply for VGA extender 1X2 splitter
5. One or two pieces of 5V@2A Power Supply for Receivers

Panel Descriptions

Connection and Operation
1. A piece of VGA cable is utilized to connect a single VGA source to main VGA input.
2. VGA output of the Sender is connected to a local display. Audio output of the Sender is connected with a local Sounder.
3. Please use a piece of CAT-5e/6 to connect Sender and each Receiver.
4. Please connect VGA outputs of Receivers to remote displays. Then, audio output of Receivers is connected with remote sounders.
5. Plug one 5V@ 2A power supply into the VGA extender 1X2 splitter and the others 5V@2A power suppliers to each Receiver individually.
6. Cable should be inserted or extracted gently.