Home ST16 Double Reduction Drive Axle

ST16 Double Reduction Drive Axle

Our ST16 double reduction drive axle is an upgraded product on basis of the original Steyr drive axle. It is provided with the overall press-welding type axle housing, the structure of which has been further optimized.


This product can give plenty of velocity ratios for option, including 3.93, 4.42, 4.80, 5.73, 6.72, 9.49, and 10.89. It can be selectively installed with ABS, the gap automatic adjusting arm, and some others. Our product is mainly adapted for road vehicles. Due to the adoption of strengthened design, its carrying capacity and reliability are greatly improved. Moreover, its application is wide.

ST16 Double Reduction Drive Axle


Main Parameters
ModelST16 (single axle) ST16 (double axle)
FormCentral reduction Hub reduction, Press-welding axle housing
Rated Axle Load (kg) 13000 2×13000
Velocity Ratio3.93/4.42/4.80/5.73/6.72/9.49/10.89
Distance between the Centers of Leaf Spring Seats 1010 1020
Distance between Tires (mm) 1850 1850
Input Flangeφ180 Transverse toothφ180 Transverse tooth
Differential Locking DeviceBetween tiresBetween axles or tires
Brake Type and SizeDrum type φ420×185 Drum type φ420×185
Weight (excluding lubricating oil) (kg) 800 Intermediate: 860/ Rear: 800
Wheel Installation Method Rim center positioning, Wheel bolt 10-M22×1.5, Distribution circle φ335
Min. Rim Size (inch)20 20
Lubricating OilGL5 85W-90

Related Names
Transport Vehicle Drive Shaft Supplier | Reinforced Carrier Driving Shaft | Automobile Component


Recommended Products
Hot Products