Explosive Proof Hydrogen Analyzer
Explosive Proof Hydrogen Analyzer
The explosive proof hydrogen analyzer determinates gas concentrations by measuring the thermalconductivity of gas. The CI-H400L analyzer uses advanced thermal conductivitysensor with single chip technology. The explosive proof hydrogen analyzer adopts platinum thread as sense organ to make up bridgeimbalance, which output signal has a relationship with tested gas volume. Andthe single chip will magnify, sieve wavelength, modify linearly and criteriathe signal by electric procedure.
The explosive proof hydrogen analyzer will output direct ratio signal to the tested gasconcentration. It is extensively used in measuring H2 concentration inH2 production line, supply gas and cycle gas for ammonia and fertilizationproduction. Also in cycle gas for hydrogen-cooled generator, in environment airor industrial container and measuring exceed H2 concentration in argonproduction
Features of the ExplosiveProof Hydrogen Analyzer
1. Importedcorrosion-resistance sensor, intercross resistance and advanced digitalprocessing
2. Lowdrift electric bridge with high stability and good reliability
3. The explosive proof hydrogen analyzer has concise menu and simple operation
4. Innerflow meter, flow controller, stainless steel joints and optional constanttemperature control system
5. The explosive proof hydrogen analyzer has option for inner air pump
6. Settingupper and lower alarm values freely during the measure ranges
7. Connected to acomputer via the standard RS232 or RS485 interface.
Technical Specifications of the Explosive Proof Hydrogen Analyzer
| Range | 80.00~99.99% H2 |
| Accuracy | ≤±2% in FS range |
| Stability | Zero drift ≤±2% of FS/7d Span drift ≤±2% of FS/7d |
| Repeatability | ≤±0.5% |
| Warm-up | ≤7 minutes |
| Response Time | 90% of final FS reading≤30 seconds |
| Fluctuated Output | 0.5% F.S |
| Working Temp. | -10℃ to 60℃ |
| Sensor Principle | Thermal Conductivity Sensor |
| Ambient Humidity | ≤80%RH |
| Sample Gas Flow | 200ml-400ml/mim |
| Sample gas pressure | 0.05MPa≤Inlet pressure≤0.3Mpa |
| Power supply | 220±10% VAC, 50/60Hz, power loss≤15VA |
| Weight | 8 Kg |
| Installation dimension | 200 mm × 300 mm × 110 mm (W×H×D) |
We are an explosive proof hydrogen analyzer manufacturer in China. We offervarious types of products such as N2/O2 analyzer, high purity portable oxygenanalyzer and dew point analyzer.
Links：https://globefindpro.com/products/93161.html
