500kW Biogas Generator Set

Description

Model	Dimension (mm) L×B×H	Net Weight (kg)	Instruction	Application
500GF1-1RZ	5447×2140×2822	11200	This is a common type of biogas generator set designed with TEM control system and open cooling method for heat exchanger.	Suitable for biogas with high density not lower than 45%
500GF1-1PwZ	5447×2140×2822	10750	This is a common type of biogas generator set designed with TEM control system and closed cooling method for horizontal water box with more than one fan.
500GFZ1-1RZ	5447×2140×2822	11200	This is an automatic biogas generator set designed with EAM/ESM control system and cooling method for heat exchanger.
500GFZ1-1PwZ	5447×2140×2822	10750	This is an automatic biogas generator set designed with EAM/ESM control system and closed cooling method for horizontal water box with more than one fan.
500GF1-2RZ	5678×2170×2839	11200	This is a common type of biogas generator set designed with TEM control system and open cooling method for heat exchanger.	Suitable for biogas with high density not lower than 45%
500GF1-2PwZ	5678×2170×2839	10750	This is a common type of biogas generator set designed with TEM control system and closed cooling method for horizontal water box with more than one fan.
500GFZ1-2RZ	5678×2170×2839	11200	This is an automatic biogas generator set designed with EAM/ESM control system and cooling method foe heat exchanger.
500GFZ1-2PwZ	5678×2170×2839	10750	This is an automatic biogas generator set designed with EAM/ESM control system and closed cooling method for horizontal water box with more than one fan.
500GJZ1-PwZ	9014×3000×2900	20000	This is an automatic mobile power station which looks like a container. It is designed with ESM3 control system, closed cooling method for horizontal water box with more than one fan and container-shaped set.	Suitable for biogas with high density not lower than 45%

Conditions for Using
1. The temperature of the biogas should not surpass 40℃ when the distance between the biogas and the pressure regulating valve for air inflow is 1m or nearer.
2. The pressure that this biogas generator set can sustain ranges from 3kPa～10kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.
5. The granularity of the impurity should not surpass 5μm and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. Low density biogas generator should be used for biogas with methane of about 30%~45%.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. provided.

Technologies Used
This biogas generator set uses electrical fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.

Technical Specifications

Name of Parameter	Value of Parameter
Model of the set	500GF1－1RZ/PwZ	500GFZ1－1RZ/PwZ	500GF1－2RZ/PwZ	500GZF1－2RZ/PwZ	500GJZ1-PwZ
Model of gas engine	Z12V190ZLDk-2A		Z12V190ZLDk-2B		Z12V190ZLDk-2J
Model of generator	1FC6 455-6LA42
Rated power(kW)	500
Rated current(A)	902
Rated voltage(V)	400
Rated frequency(Hz)	50
Rated rotated speed(r/min)	1000
Rated power factor(cosφ)	0.8(lag)
The number of phase and the wiring method	Three coils wired by three phase lines or three coils wired by three phase lines and one zero line.
Way for adjusting pressure	Automatic adjusting pressure
Excitation method	Brushless excitation
Starting up method	24VDC Electric starting system

Technical Parameters

Name of Parameter	Value of Parameter
Model	Z12V190ZLDk-2A	Z12V190ZLDk-2B	Z12V190ZLDk-2J
Number of cylinder	12
Arranging way of cylinders	V shape with included angle of 60°
Diameter of cylinder(mm)	190
Route(mm)	210
Total displacement(L)	71.45
Air inflow way	Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used.
Rated power(kW)	550
Rated rotate speed(r/min)	1000
Min. stable rotate speed with empty load(r/min)	600
Dimension(L×B×H) (mm)	2692×1560×2170
Net weight(kg)	5900

As a China-based biogas generator set manufacturer, Shengli provides a comprehensive range of biomass generator set, coal mine gas generator set, marine engine, and more. Due to our consistent focus on quality, our products have obtained CE, GOST and CCC certificates, and our company has been ISO9001:2008 certified. Our gas engines are economically priced because we greatly reduced our production cost due to our easy acquisition of abundant labors and sea transportation. For more detailed information, please continue browsing our website or feel free to call us directly.