180kW-300kW Natural Gas Generator Set

Description

Model	Dimension (mm) L×B×H	Net Weight (kg)	Instruction
180GF-RT/PwT/PT	5300×1970×2250	7800	Open cooling method for heat exchanger
	4510×1970×2260	7200	Closed cooling method for horizontal water box with more than one fan.
	5300×1970×2410	8200	Closed cooling method for vertical water box with fan
260GF-RT/PwT/PT	5300×1970×2170	8200	Open cooling method for heat exchanger
	4510×1970×2260	7600	Closed cooling method for horizontal water box with more than one fan.
	5300×1970×2410	8600	Closed cooling method for vertical water box with fan
300GF-RT/PwT/PT	5300×1970×2170	8400	Open cooling method for heat exchanger
	4600×2150×2400	7800	Closed cooling method for horizontal water box with more than one fan.
	5300×1970×2410	8800	Closed cooling method for vertical water box with fan

Conditions for Using
1. For pressurized natural gas generator in this natural gas generator set, the pressure for air inflow is 100kPa~300kPa; for unpressurized natural gas generator, the pressure for air inflow is 30kPa~300kPa.
2. If the distance between the natural gas and the pressure regulating valve for air inflow is 1m or nearer, the temperature of the natural gas should not surpass 40℃.
3. The content of the methane in natural gas for this natural gas generator set should not be lower than 70% and the low heating value is 32MJ/Nm3~45MJ/Nm3.
4. The content of H2S should not surpass 20mg/Nm3 and the total content of sulfur should not surpass 480mg/Nm3.
5. The granularity of the impurity should not surpass 5μm and the content of the impurity should not surpass 30mg/Nm3. There should not be any free water, clean oil, etc.

Technologies Used
This natural gas generator set uses electrical fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.

Technical Parameters

Name of Parameter	Value of Parameter
Model of the set	180GF-RT/PwT/PT	260GF-RT/PwT/PT	300GF-RT/PwT/PT
Model of gas engine	T6190-2	T6190ZL-2	T6190ZL-2A
Model of generator	1FC6 354-6LA42	1FC6 356-6LA42	1FC6 404-6LA42
Rated power(kW)	180	260	300
Rated current(A)	324	468	540
Rated voltage(V)	400
Rated frequency(Hz)	50
Rated rotated speed(r/min)	1000
Rated power factor(cosφ)	0.8(lag)
The number of phase and the wiring method	Three coils wired by three phase lines or three coils wired by three phase lines and one zero line.
Way for adjusting pressure	Automatic adjusting pressure
Excitation method	Brushless excitation
Starting up method	24VDC Electric starting system

Given below are Technical Parameters

Name of Parameter	Value of Parameter
Model	T6190-2	T6190ZL-2	T6190ZL-2A
Number of cylinder	6
Arranging way of cylinders	Straightly arranged
Diameter of cylinder(mm)	190
Route(mm)	210
Total displacement(L)	35.73
Air inflow way	Naturally aspirated	Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used.
Rated power(kW)	210	280	340
Rated rotate speed(r/min)	1000
Min. stable rotate speed with empty load(r/min)	600
Dimension(L×B×H) (mm)	3226×1120×1630	3226×1120×2005	3226×1120×2005
Net weight(kg)	3800	4500	4500

Shengli is a professional manufacturer of natural gas generator set based in China, which is ISO9001 and ISO14001 certified. We also provide biomass generator set, biogas generator set, coal mine gas generator set, and more. All our products are CE, CCC certified and have passed the test of market. We sincerely hope buyers and agents worldwide will feel free to contact us. We look forward to working with you!