180kW-300kW Biogas Generator Set

Description

Model	Dimension (mm) L×B×H	Net Weight (kg)	Instruction
180GF-RZ/PwZ/PZ	5300×1970×2250	7800	Open cooling method for heat exchanger
	4510×1970×2260	7200	Closed cooling method for horizontal water box with more than one fan
	5300×1970×2410	8200	Closed cooling method for vertical water box with fan
260GF-RZ/PwZ/PZ	5300×1970×2170	8200	Open cooling method for heat exchanger
	4510×1970×2260	7600	Closed cooling method for horizontal water box with more than one fan
	5300×1970×2410	8600	Closed cooling method for vertical water box with fan
300GF-RZ/PwZ/PZ	5300×1970×2170	8400	Open cooling method for heat exchanger
	4600×2150×2400	7800	Closed cooling method for horizontal water box with more than one fan
	5300×1970×2410	8800	Closed cooling method for vertical water box with fan

Conditions for Using
1. The temperature of the gas should not surpass 40℃ when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. This biogas generator set can sustain pressure ranges from 3kPa～10kPa and the fluctuated frequency of the pressure should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than 45% and its fluctuated frequency should not surpass2%/min.
4. The content of H2S should not surpass 200mg/Nm3 and the content of NH3 should not surpass 20mg/Nm3.
5. The granularity of the impurity should not surpass 5μm and the content of the impurity should not surpass 30mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass 40g/Nm3.
7. Low density biogas generator should be used for biogas with methane of about 30%~45%.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. provided.

Technologies Used
The biogas generator set uses electrical fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.

Technical Specifications

Name of Parameter	Value of Parameter
Model of the set	180GF-RZ/PwZ/PZ	260GF-RZ/PwZ/PZ	300GF-RZ/PwZ/PZ
Model of gas engine	Z6190DK-2	Z6190ZLDK-2	Z6190ZLDK-2A
Model of generator	1FC6 354-6LA42	1FC6 356-6LA42	1FC6 404-6LA42
Rated power(kW)	180	260	300
Rated current(A)	324	468	540
Rated voltage(V)	400
Rated frequency(Hz)	50
Rated rotated speed(r/min)	1000
Rated power factor(cosφ)	0.8(lag)
The number of phase and the wiring method	Three coils wired by three phase lines or three coils wired by three phase lines and one zero line.
Way for adjusting pressure	Automatic adjusting pressure
Excitation method	Brushless excitation
Starting up method	24VDC Electric starting system

Technical Parameters

Name of Parameter	Value of Parameter
Model	Z6190DK-2	Z6190ZLDK-2	Z6190ZLDK-2A
Number of cylinder	6
Arranging way of cylinders	Straightly arranged
Diameter of cylinder(mm)	190
Route(mm)	210
Total displacement(L)	35.73
Air inflow way	Naturally aspirated	Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used.
Rated power(kW)	210	280	340
Rated rotate speed(r/min)	1000
Min. stable rotate speed with empty load(r/min)	600
Dimension(L×B×H) (mm)	3226×1120×1630	3226×1120×2005	3226×1120×2005
Net weight(kg)	4000	4500	4500

As a China-based biogas generator set manufacturer, we also produce marine engine, oilfield dual-fuel engine, natural gas generator set, etc. to suit your various needs. We can manufacture gas engine according to customers' specific requirements. With the advantage of superior quality and reliability, our products are in increasing demand in the United States, Cambodia, Syria, the United Kingdom, among others. If you have any related need, please contact us via any of the methods listed on the website.