Managed Fiber Media Converter

Olycom manageable fiber media converter maximizes the convenience for network management with its full compliance with SNMP, WEB GUI, TELNET and CONSOLE protocols, easy installation, and wide and flexible ranges of working modes and distances.

In its application, standalone managed fiber media converters are equipped at one end while cards integrated in chassis at the control center. In this way it can realize SNMP, WEB GUI, TELNET and CONSOLE management. And when standalone managed fiber media converters are paired without chassis, it can be managed via WEB GUI which is IP based.

OM1917 Media Converter Chassis is designed to concentrate both managed and unmanaged media converter cards. It is 19'',2U, with 17 slots and 16 of which are in the front for media converter cards while the other 1 in the back for management card or cascading card at local end.

Features

Standalone Managed Fiber Media Converter
1. Supports SNMP, WEB GUI, Telnet and CONSOLE
2. Bandwidth control (N*32K)
3. Max. 2046bytes packet at store-and-forward mode
4. Supports Q-in-Q Tag VLAN, flow control
5. Supports Link Fault Pass through function (LFP)
6. Supports loop back test and Auto Laser Shutdown (ALS)
7. Supports remote CPE power failure detect
8. D/D function for supported SFP optical transceiver

Managed Fiber Media Converter Chassis
1. Hot plug-and-play
2. Supports remote and local management
3. Compatible with CONSOLE, WEB and SNMP
4. Dual power supply of AC 220V or DC -48V
5. Mixed installation of 100M and 1000M modules
6. Maximum convenience for centralized control
7. Easy installation into cabinet with 19” 2U size

Applications
1. Building and campus network system
2. Net Bar Systems
3. Intelligent Community Networks
4. Where centralized management is needed

Technical Specifications

Standalone Managed Fiber Media Converter

Standard	RJ-45 Port	Auto-MDI/MDIX
IEEE802.3 (10BASE-T)	Fiber Connector	Depends on the SFP
IEEE802.3u 100BASE-TX/FX (Fast-Ethernet)	Wavelength	1310/1550nm
IEEE802.3ab 1000BASE-TX (Gigabit Ethernet)	Dimensions	138mm(W) x 179mm(D) x 34mm(H)
IEEE802.3z 1000BASE-SX/LX (Gigabit Ethernet)	Weight	Net weight : 0.666kg
IEEE802.3x (Flow Control)		Gross weight : 0.984kg
IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree	Input Voltage	AC100 ~ 240V / 50-60HZ (Internal power supply)
10/100/1000BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)	Power Consumption	<2.5W
1000BASE-FX	MTBF	50,000 hours
50/125um, 62.5/125um multimode fiber cable (550m)	BER	<1/1000000000
9/125um singlemode fiber cable (20/40/60/80/100Km)	Operation	0℃~50℃
Conversion Mode / Delay Time	Storage	-40℃~70℃
Store-and-Forward < 10us, straight-through<0.9us	Storage Humidity	5%~90% non-condescending
Flow control	MAC Address Table	1K
Full duplex-flow control, Half duplex-back pressure	Buffer Size	1M
Management
Supports SNMP, WEB GUI, Telnet and CONSOLE, remote control

Managed Fiber Media Converter Chassis

Slots
Slots	16 in the front for media converter cards, 1 in the back for management or cascading card
Compatibility(cards)	OM220, OM220MR, OM220WEM, OM320, OM320MR, OM320WEM OM520, OM520MR, OM520WEM

Work Mode
Conversion Method	Cut-through; Store-and-Forward
Max. Conversion Speed	148800pps
Max. Frame	1600bytes
Buffer Capacity	256K bits
MAC Address Table	1K

Power and Environment
Operating voltage	Dual power supply, 220V/-48V
Operating temperature	-10℃~ 75℃
Storing temperature	-40℃~ 85℃
Humidity	0~95% non-condensing
MTBF	≥ 5*104 hours

Dimension and Weight
Dimension	482(L)*365(W)*90(H) mm
Weight	6.16kg/piece (Net Weight), 7.16 kg/piece (Gross Weight)

OLYCOM is a fiber optic transmission equipment manufacturer in China. Our areas of specialty are Fiber Optic Transmission products for CCTV video surveillance, Intelligent Transport Systems and communication networks. We provide reliable and cost-effective Video over Fiber and Ethernet over Fiber solutions. Our main products are Optical Video Transmitter and Receiver, Fiber Media Converter, and SFP Optical Transceiver. Apart from that there is a wide range including fiber switch, PDH multiplexer, protocol converter, fiber MODEM, fiber LAN card, network booster, tester, and passive components. CCTV camera and DVR are in our product portfolio for the convenience of those who prefer
one-stop purchase. Last but not least, customization, OEM, and ODM services are available whenever they are required.