Rollover Car Wash Machine CF-360 (EU Type)

The car wash system EU type (CF-360) is a car wash machine with tire brushes, which clean the tires during the washing process, improving the car washing completeness. The double powerful mute dryers are used to increase the drying performance. The table below shows the basic information about the car wash system EU type.

Parameters Advantages Details Configurations Parameters

Model	CF-360
Dimension	L*W*H: 2.4m×3.6m×2.9m
	Rail length: 9m Rail distance: 3.2m
Assembling Range	L*W*H:10m×3.7m×3.1m
Moving Range	L*W: 10000mm×3700mm
Voltage	Voltage AC380V 50Hz Capacitance 12KVA
Water Supply	DN25mm water flow rate≥80L/min
Air Pressure	0.75～0.9Mpa air flow rate≥0.1m3/min
Ground Flatness	Deviation≤10mm
Applicable Vehicles	Sedan/jeep/minibus within 10 seats
Applicable Car Dimension	L*W*H: 5.4m×2.1m×2.1m
Washing Time	Normal washing: 3'20'' Fine washing: 7'10''

Advantages Fully automatic: microcontroller unit (MCU) ensures high efficiency and low failure rate, and allows for remote upgrading. The corrosion resistance of the galvanized door-shaped frame of the vehicle washing equipment is the 10-20 times that of hot galvanized plate, increasing the service life. Two powerful air mute dryers can follow contours of vehicles to improve the drying effect. Foam and water wax proportioning system is easy to operate. Two-Click washing method simplifies operation. Built-in self-diagnose system can recognize and remove obstacles during car washing. Details
Control panel
MCU control system
High pressure pump
Foam material brush
Car shampoo and wax sprinkling
Air dryer – the contour-following drying system dries cars of any shapes
Device equipped to get car exterior information
LED screen
Convex mirror
Anti-collision poles
Photoelectric sensor 4th generation of photoelectric technology

The 4th generation of photoelectric technology helps scan the car and collect the information of car bodies before cars get in the car wash machine. The motion of top brushes is calculated by the PLC system and is thus smooth, steady and free from external interference.

Fully automatic car washing entails safety as a top priority. To guarantee safety, Risense rollover car wash machine CF-360 is equipped with LED screen, convex mirrors, anti-collision poles on both sides and other accessories.

Car washing nozzles for wheels

Car washing nozzles are particularly added in the rollover car wash machine to better clean the wheel hubs.

Brushes tilting technology

Using the tilting technology, multi-dimensional side brushes will smartly adapt to the car exteriors in the tilted position, which greatly improves the cleaning effect.

When cleaning the rear of SUVs and estate cars, brushes are pivoted forward and backward to match the sloping hatchback, which enables the brushes to clean the recesses.

Swallow-tailed sawtooth foam brushes

Side brushes and wheel brushes of Risense’s rollover car wash machine CF-360 are made of 4th generation of swallow-tailed sawtooth foam brushes that feature great capacity to retain water and reduce noise. It is quiet and effective to wash cars, which helps you attract more customers.

Smart safety system

The smart safety system of Risense’s rollover car wash machine CF-360 consists of 6 photoelectric censors on the side air outlets and the height limit device on the top air outlets. 3 pairs of photoelectric censors are responsible for collecting cat exterior information while the height limit device responsible for lifting the top air outlets when touching cars. The combination of photoelectric sensors and the height limit device makes car washing much safer.

Configurations

Standard Devices	Optional Devices
Shampoo spray system	Undercarriage wash system
Water wax spray system	Automatic washing mode
Side and overhead contour-following drying system
Equipment data intellectualization
Self-diagnose system