Horizontal Lathe

Send Message Request a Quote

CD6250 horizontal lathe

HorizontalLathe

，

The horizontal lathe is designed forturning excircle, innerbore, face, cutting metric, Whitworth, modulus, diametral pitch thread, boring, reaming, etc. In thegroove, it can process shaft with large diameter, sleeve and disc-type workpiece. The swingdiameter of this machine is 500mm, and three models are supplied depending onthe length of workpiece(1000mm, 1250mm and 1500mm). Our product is widely applied in machiningfactory.

Technical Parameters

Model	CD6250
Max. Distance between Centers	1000/1500/2000mm
Max. Swing over Bed	500mm
Max. Swing over Tool-post	280mm
Max. Swing over Gap	750mm
Spindle Bore Diameter	85mm
Effective Length of Gap	240mm
Taper of Spindle Bore	1:20
Spindle Speed Number and Range	12/21~1500rpm
Number of Spindle Cross/Longitudinal Feed	138
Spindle Longitudinal Feeding Range	0.04~2.23mm/r
Spindle Cross Feeding Range	0.02~1.12mm/r
Metric Thread Number/Pitch Range	32/0.9~40mm
Whitworth Thread Number/Pitch Range	32/40~1t.p.i
Modulus Thread Number/Pitch Range	24/0.45~10mm
Diametral Thread Number/Pitch Range	30/DP 80~1.75
Max. Travel of Cross Tool-post	340mm
Max. Travel of Upper Tool-post	150mm
Tool Post Swiveling Angle	±45°
Power of Apron Rapid-travelled Motor	250W
Speed of Carriage Rapid-travelled Motor	4000mm/min
Main Motor Power	7.5kW
Cool Pump Power	90W

Ourhorizontal lathe has a large spindle bore, and the machine guide rail isprocessed by super audio which makes it hardened and fine ground. This productgenerates low noise and it is easy to operate. Meanwhile, the rigidity is good,and the machining process is very precise.

Scan QR to Read
Links：https://globefindpro.com/products/56049.html

Recommended Products