Infrared Sensor Switch

The infrared sensor switch is an automatic energy saving product based on the infrared technology. It has a light sensor circuit detecting the lightness of the ambient environment. The circuit automatically turns off the lights in the daytime to save energy. When the natural light becomes insufficient, the circuit will switch to a standby status and automatically turns on the lights once infrared spectrum emitted by human body is detected. As long as people are in the detection zone, the circuit keeps the lights on. If people leave the detection zone, the circuit will turn off the lights several seconds later.
The switch does not using the opening and closing of contacts to control the power supply, so it does not make electric sparks. It is safe and durable, and hence an ideal choice for public areas.

Specification
Electric power supply: single pole.
The switch is connected between the hot wire and the load, forming a series circuit.
Applicable places: corridors, halls, toilet rooms, basements, warehouses, garages and so on.
Operating voltage: AC220V/50HZ
Time delay: 15 to 45 seconds
Detection zone: cone angle, ≤160 degrees, within 7 to 10 meters
Power of the load: MAX100W
Type of the load: incandescent lights, fluorescent lights
Ambient temperature: -15 to 50℃

Warning
1. Cut off the electric power when installing the switch.
2. Place the product at least 0.5 meter away from a light source, otherwise it will not work properly.
3. Do not directly connect the hot wire and neutral wire to the product. Do not use the product for loads whose power exceeds 100W. Avoid short circuits.
4. Do not install it in places where the temperature or humidity is high, or there are corrosive gases or harmful impurities in the air. Otherwise, it will not work properly.
5. If the switch malfunctions, say the light can not be turned on or off, check whether the cable connection is correct, whether the load is working normally. Carefully read the instruction book, understand the rating power as well as type of the load before installing the product. If you can not handle the problem yourself, contact us or technical support.

Specification

Related Names
Motion Detector Lighting Switch | Single Pole Wall Switch | Sound Activated Light Switch